Abstract:This paper presents a method for measuring, identifying, and compensating the pose errors of a six-axis gantry automated fiber placement (AFP) machine. Due to the particularity of the elastic pressure roller (EPR) of the end-effector, a calibration method of the pressure roller coordinate system is proposed. In order to quickly measure the pose of the EPR, a special pose measurement tool is designed. Based on the screw theory and homogeneous transformation matrix, ideal forward and inverse kinematic models are established and verified on the actual placement path. According to the geometric errors and the offset errors of the machine coordinate system obtained by the analysis, the pose error transfer model of the AFP machine is established. Considering the position and orientation accuracy of the EPR, a comprehensive optimization objective function is established, and all the pose errors are identified synchronously using the Levenberg-Marquardt optimization algorithm, which greatly reduces the pose errors of the AFP machine. Finally, the G codes are modified by combining the iterative method and the inverse kinematic model to realize the compensation of the pose errors. To comprehensively verify the effect of pose error compensation, path control points are randomly selected on the placement paths of the fuselage panel in four directions to compensate the pose errors. The experimental results show that the method proposed in the article can effectively improve the pose accuracy of the AFP machine, so as to meet the requirements of placement accuracy.

DESIGN AND EXPERIMENTAL RESEARCH OF AUTOMATED FIBER PLACEMENT EQUIPMENT

Fiber Tension Prediction and Control Methods in Automated Fiber Placement

Modeling of Tension Control System with Passive Dancer Roll for Automated Fiber Placement

THE DEVELOPMENT OF A NEW TENSION CONTROL SYSTEM FOR AUTOMATED FIBER PLACEMENT MACHINE

Kinematic Modeling and Parameter Identification for a Heavy Gantry-Type Automated Fiber Placement Machine Considering Gravity Deformation

Design Research on Roller of New Fiber Carding Machine

SCHEMATIC DESIGN AND EXPERIMENTAL RESEARCH OF A NEW FIBER PLACEMENT HEAD

Modeling and experimental validation of compaction pressure distribution for automated fiber placement

Research on fiber placement machine and path planning methodology

Measurement, Identification, and Compensation of Pose Errors for Six-Axis Gantry Automated Fiber Placement Machine

Design of Robotic Fiber Placement Machine and Process Optimization for Thermoplastic Composites

Research Progress on Automated Fiber Placement Technology

Continuous Stiffness Optimization of Mobile Robot in Automated Fiber Placement

An Analytical Model for Pressure Distribution in Automated Fiber Placement on Irregular Surfaces and Its Application in Aeronautical Manufacturing

Modeling and Compensation of Volumetric Errors for a Six-Axis Automated Fiber Placement Machine Based on Screw Theory

Development of 7-DOF Four Tows Fiber Placement Machine and CNC System

A Review of Tensioner for Automated Fiber Placement

Comparative Study of Tows Increase or Decrease Methods for Fiber Placement Machine

A New Fiber Winding Precisiong Tension Control System

A Planar Underactuated Compaction Mechanism with Self-Adaptability for Automated Fiber Placement Heads

Design of simulation system for fiber placement based on CATIA CAA