Abstract:The hydraulic and thermals performance of flow in a double-tube heat exchanger with an inner twisted triangle tube of length L = 1 m has been studied numerically. Equations for energy, turbulence, and Navier–Stokes were used to model the fluid flow and heat transfer in a double-tube heat exchanger with an inner twisted triangle tube. The Reynolds number range was 5000–30,000 for nanofluid (water-Al 2 O 3 ) as a working fluid under a turbulent flow regime. The considered configuration was examined by varying the volume concentration of nanofluid while keeping the twist ratio constant (Tr = 5). Different cases of volume concentration of nanofluid are triggered (0.05 %, 1 %, 2.5 %, and 4 %, respectively). The numerical outcomes of a double-twisted tube heat exchanger with an inner triangle-twisted tube are validated with the obtainable numerical data. The governing equations were solved with ANSYS Fluent 18.2. The findings reveal that the larger volume concentration of nanofluid (4 %) gives a greater Nusselt number and vice versa due to the increased thermal conductivity of the nanofluid in the double twist tube heat exchanger compared with a plain tube. However, the nanofluid Nusselt number grows with the rise of both the Reynolds number and volume concentration (Ø), and the best value of the Nusselt number is 210 when Reynolds number = 30,000 and Ø = 4 %. The effectiveness of the heat exchanger grows with an increase in the concentration of the nanofluid and a reduction in the torsion ratio compared to the normal tube. The effectiveness of the double-tube heat exchanger with an inner twist triangle tube increases to the highest value of 0.38 at Reynolds 30,000 and Ø = 4 %.

Numerical Simulation of Fluid Flow and Heat Transfer in Shell Side of Twisted Tube Heat Exchanger

Numerical Simulation of Mass and Heat Transfer in Detachable Spiral Heat Exchanger

Study on shell side heat transport enhancement of double tube heat exchangers by twisted oval tubes

Numerical Simulation of Heat Transfer in Finned Tube of Heat Recovery Unit Using Fluid-Solid Coupled Method

Numerical investigation of thermal-hydraulic characteristics in cross-flow heat exchangers with different twisted oval tubes

Study on Simulation of Heat Transfer Tubes with Twisted-Tape Inserted

A numerical and experimental study of chevron, corrugated-plate heat exchangers

Numerical Analysis of H-type Finned-tube Heat Exchanger

Internal Flow Analysis of a Heat Transfer Enhanced Tube with a Segmented Twisted Tape Insert

Numerical analysis on the flow and heat transfer characteristics of heat exchanger with cruciform tube

Experimental Research on Heat Transfer and Flow Resistance Properties in Spiral Twisted Tube Heat Exchanger

Numerical Simulation of Fluid-Elastic Instability in Heat Exchanger Tube Bundles

NUMERICAL ANALYSIS OF LAMINAR FLOW AND HEAT TRANSFER IN TWISTED ELLIPTIC TUBES

Numerical Computations on Flow and Heat Transfer Characteristics of a Helically Coiled Heat Exchanger Using Different Turbulence Models

Numerical Simulation of the Heat Transfer Inside a Shell and Tube Heat Exchanger Considering Different Variations in the Geometric Parameters of the Design

Numerical evaluation of the heat transfer in a shell and corrugated coil tube heat exchanger with three various water‐based nanofluids

Convective thermal-hydraulic performance in twisted tubes: From the perspective of symmetrical cross-sectional shapes

Semi-numerical analysis of heat transfer performance of fractal based tube bundle in shell-and-tube heat exchanger

Numerical simulation of flow and heat transfer performance of tube-shell coupled helically coiled corrugated tube heat exchanger

Influence of the twisting and nano fluids on performance of a triangular double tube heat exchanger

Numerical study on the thermal performance of the shell and tube heat exchanger using twisted tubes and Al2O3 nanoparticles