Abstract:Alkanes and their mixtures (paraffins) have widely been used as phase change materials (PCMs) for low-to-medium temperature thermal energy storage. Among the various alkanes, eicosane, with a nominal melting temperature of 37 degrees C, has emerged in energy-storage-based passive thermal management technologies, for electronics for example. In an effort to increase the thermal conductivity of eicosane, the effect of adding graphene nanoplatelets (GNPs) as thermally conductive nanofillers was investigated experimentally. The composite PCM samples were prepared by dispersing GNPs in liquid eicosane at various loadings (0, 1, 2, 5, and 10 wt.%) without any surfactants. Thermal conductivity of the composite PCM samples in their solid phase was then measured by means of the transient plane source technique at elevated temperatures from 10 to 35 degrees C. Latent heat of fusion and melting point of the samples were also characterized using a differential scanning calorimeter. It was shown that for the highest loading examined (10 wt.%), the relative thermal conductivity enhancement is above 400% at 10 degrees C, indicating that the emerging GNPs have much better performance than the conventional nanofillers attempted in the available literature, such as metal/oxide nanoparticles and carbon nanotubes. Reduced thermal interface resistance, related to the unique two-dimensional planar morphology of GNPs, was interpreted to be responsible for their superior performance. The matrix/filler thermal interface resistance was estimated to range from 6 x 10(-9) to 9 x 10(-9) m(2) K/W. In contrast to the markedly increased thermal conductivity, however, the penalty of decrease in the energy storage capacity, caused by the presence of GNPs, was shown to be less significant.

In-situ polymerization of resin for improving the thermal conductivity of CEG/paraffin

Phase Change Materials of Paraffin in H-Bn Porous Scaffolds with Enhanced Thermal Conductivity and Form Stability

Thermal Conductivity of Aerated Concrete (AC) Composites Containing Micro-Encapsulated Phase Change Materials

Preparation and Properties of Paraffin /LDPE /OMMT /graphite Phase Change Composite for Thermal Energy Storage

Preparation and characterization of paraffin/expanded graphite composite phase change materials with high thermal conductivity

Preparation and Thermal Characterization of Hollow Graphite Fibers/Paraffin Composite Phase Change Material

High thermal conductivity of porous graphite/paraffin composite phase change material with 3D porous graphite foam

Experimental Study of the Thermal Properties of a Homogeneous Dispersion System of a Paraffin-based Composite Phase Change Materials

Thermal Conductivity Enhancement and Shape Stabilization of Phase-Change Materials Using Three-Dimensional Graphene and Graphene Powder

Thermal and Mechanical Properties of Expanded Graphite/Paraffin Gypsum-Based Composite Material Reinforced by Carbon Fiber

Enhanced thermal conductivity of form-stable composite phase-change materials with graphite hybridizing expanded perlite/paraffin

Thermal-Conductivity-Enhancing Copper-Plated Expanded Graphite/Paraffin Composite for Highly Stable Phase-Change Materials

Enhancing the solar absorption capacity of expanded graphite-paraffin wax composite phase change materials by introducing carbon nanotubes additives

Increased Thermal Conductivity of Eicosane-Based Composite Phase Change Materials in the Presence of Graphene Nanoplatelets

Experimental and numerical investigation of phase change progress for paraffin in hybrid aerogel of graphene and carbon nanotubes

A novel flexible carbon fiber with carbon nanotubes growing in-situ via chemical vapor deposition to impregnate paraffin for thermal energy application

Improvement of thermal cycle stability of paraffin/expanded graphite composite phase change materials and its application in thermal management

Thermal conductivity enhancement and shape stabilization of phase change thermal storage material reinforced by combustion synthesized porous Al2O3

Experimental and numerical investigations of enhanced thermal energy storage performance for foam/paraffin composite under different heating conditions

Improving Thermal Management of Electronic Apparatus with Paraffin (pa)/expanded Graphite (eg)/graphene (GN) Composite Material

Paraffin/polyethylene/graphite composite phase change materials with enhanced thermal conductivity and leakage-proof