Application analysis of Fenton /flocculation process for advanced treatment of pulp and papermaking wastewater
Xiaolei Shi,Lin Zhu,Jinkai Liu,Hongying Hu
2013-01-01
Abstract:The relation of H 2 O 2,waste acid(8% FeSO 4),Al 2(SO 4) 3,PAM,CaO and treatment capacity,influent load,COD removal were analyzed based on the long term operation date of a Fenton / flocculation process used for advanced treatment of pulp and papermaking wastewater.The average dosages of H 2 O 2,waste acid,Al 2(SO 4) 3,PAM and CaO to unit volume of wastewater were 0.05 kg/m3,2.18 kg/m3,0.07 kg/m3,0.0075 kg / m3and 0.27 kg / m3,respectively,and the average reagent consumption of COD removed were 0.20 kg /(kgCOD),8.48 kg /(kgCOD),0.27 kg /(kgCOD),0.029 kg /(kgCOD) and 1.06 kg /(kgCOD),respectively.The dosages of H 2 O 2,waste acid,Al 2(SO 4) 3 and CaO increased with the increase of influent load,but PAM had no significant change.The molar ratio of H 2 O 2 / Fe2 +(MH 2 O 2 / Fe2 +) was about 1.0 ~ 2.0,and the cumulative frequency of MH 2 O 2 / Fe2 +between 1.0 and 1.6 was about 93%.The effluent COD and SS were 65 ~ 100 mg / L and 20 ~ 30 mg / L,respectively,and met the Discharge Standard of Water Pollutants for Pulp and Paper Industry(GB 3544-2008).The treatment cost of the advanced process was about 1.01 yuan / m3,in which the chemical cost was 0.58 yuan / m3and accounted for 56.98%.