Abstract:The current range of medical applications of resorbable polyesters could be hugely expanded if more effective strategies for tailoring degradation rate were available. Block copolymerisation with poly(ethylene glycol) (PEG) has been shown to reduce degradation times; however, to date, this has relied on the addition of PEG to short lengths of polyester. This results in copolymers with high fractions of PEG and low molecular weights, reducing the potential range of applications. Furthermore, there has been no systematic study of the relative lengths of the blocks. In this work, we employed short hydroxyl-functionalised methoxy-terminated mPEG to initiate the synthesis of poly(L-lactide) (PLLA), resulting in controlled di-block copolymers with short mPEG blocks and long PLLA blocks. A controlled series of polymers was made with PLLA lengths (60 < M-n (kg mol(-1)) < 200) and mPEG lengths (550 < M-n (g mol(-1)) < 5000) giving very low mPEG content (0.1-1.5 wt%). We found that, despite the low fraction of mPEG, water uptake and the rate of hydrolytic degradation, k, increased. Significantly, k for the polymers was dependent only on the presence of mPEG, and was little affected by mPEG length or PLLA length in the ranges studied. Moreover, mass loss began in all polymers when Mn of the polymer fell below a threshold of about 20 kg mol(-1) and depended on both the initial molecular weight of PLLA and the presence (but not the length) of mPEG. Short-chain mPEG therefore provides a new route for targeted, temporal control of resorbable polyesters for biomedical devices. (C) 2018 The Authors. Polymer International published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Direct Synthesis of Biodegradable Material Polylactic Acid-Polyethylene Glycolvia Melt Copolymerization and Its Characterization

Synthesis And Properties Of Long Chain Polyesters From Biobased 1,5-Pentanediol And Aliphatic Alpha,Omega-Diacids With 10-16 Carbon Atoms

Poly(L-Lactide) Materials with Balanced Mechanical Properties Prepared by Blending with Peg-Mb-Ppa Multiblock Copolymers

Poly(glycolic Acid) Materials with Melt Reaction/processing Temperature Window and Superior Performance Synthesized Via Melt Polycondensation

Direct Synthesis of Biodegradable Material Polylactic Acid-Polyethylene Glycol via Melt Copolymerization and Catalyzed by Stannous Oxide

Biodegradable and Biocompatible P(Dl)La-Peg(1k)-P(Dl)La Diacrylate Macromers: Synthesis, Characterisation and Preparation of Soluble Hyperbranched Polymers and Crosslinked Hydrogels

Preparation and characterization of polyethylene glycol/poly(L-lactic acid) blends

Ring-opening Polymerization of L-Lactide Catalyzed by a Novel Molybdenum-Based Catalytic System

Short Poly(ethylene Glycol) Block Initiation of Poly(l‐lactide) Di‐block Copolymers: a Strategy for Tuning the Degradation of Resorbable Devices

Enhanced crystallization of poly(lactic acid) bioplastics by a green and facile approach using liquid poly(ethylene glycol)

Effects of L-lactide and D,L-lactide in poly(lactide-co-glycolide)-poly(ethylene glycol)-poly(lactide-co-glycolide) on the bulk states of triblock copolymers, and their thermogellation and biodegradation in water

Synthesis of Poly(D,L-Lactic Acid-Alt-Glycolic Acid) from D,L-3-Methylglycolide

Reactive blending of polylactic acid/polyethylene glycol toward biodegradable film

Polymerization of Lactides and Lactones, 12. Synthesis of Poly[(glycolic Acid)-Alt-(l-glutamic Acid)] and Poly{(lactic Acid)-Co-[(glycolic Acid)-Alt-(l-glutamic Acid)]}

Synthesis of High Molecular Weight Poly(L-Lactic Acid) and Poly(D-Lactic Acid) with Improved Thermal Stability Via Melt/Solid Polycondensation Catalyzed by Biogenic Creatinine

The ombudsman and medicine.

Ductile polylactic acid/poly(butylene diglycolate): structures and properties

Effect of molecular weight of polyethylene glycol on crystallization behaviors, thermal properties and tensile performance of polylactic acid stereocomplexes

Biodegradable aliphatic/aromatic copoly(ester-ether)s: the effect of poly(ethylene glycol) on physical properties and degradation behavior

Synthesis and Characterization of Degradable Triarm Low Unsaturated Poly(propylene Oxide)‐block‐polylactide Copolymers

Synthesis and Rheological Properties of Polylactide/poly(ethylene Glycol) Multiblock Copolymers