Abstract:Pure malt wine was brewed from germinated malt by semi-solid fermentation technology, and the process optimization and physicochemical properties were determined. The single factor experiment was designed to study the effects of fermentation time, inoculation amount of koji and addition amount of glucoamylase on the alcohol content of pure malt wine, and to determine the best single factor. The experimental conditions were studied after the single factor level determination, meanwhile the orthogonal design was carried out, and the optimal combination was determined as follows: fermentation time of 4 d, inoculation amount of 2‰ koji and addition amount of 2% glucoamylase. Under these conditions, the alcohol content of pure malt wine was 10.6%vol±0.3%vol, the total phenol content was 1.159±0.066 g/L, the protein content was 209.568±19.178 mg/L, the total acid content was 6.4±0.2 g/L, reducing sugar content was 8.409±0.021 g/L, the scavenging rate of hydroxyl radical was 86.75%±1.42%, and the total reduction capacity could reach 1.842±0.004. Through the analysis of variance of orthogonal experiment, it was concluded that fermentation time and glucoamylase dosage had significant effect on the alcohol content of pure malt wine (P<0.05), while inoculation amount had no significant effect on the alcohol content of pure malt wine (P>0.05). The results would provide a theoretical basis for the production and development of pure malt wine.

Optimization of fermentation process of muscat grape vinegar by response surface methodology

Optimization of Fermentation Conditions for Chinese Water Chestnut Vinegar by Response Surface Methodology

Optimization of fermentation conditions for Passiflora edulis vinegar by response surface methodology

Optimization of Fermentation Process on Sugarcane Ftuit Wine by Response Surface Methodology

Optimization of Submerged Fermentation for Fruit Vinegar Production

Optimization of Technological Conditions for One-step Fermentation for Mulberry Vinegar Production

Optimization of Production Process Conditions for Mulberry Juice Fermentation with Lactic Acid Bacteria Using Dual Response Surface Methodology

Optimization of Volatile Fatty Acid Production with Co-Substrate of Food Wastes and Dewatered Excess Sludge Using Response Surface Methodology

Optimization of the Technical Parameter for Persimmon Vinegar with One-step Fermentation Methodology

Research on Optimization of Fermentation Medium for Alcohol Vinegar Production by Uniform Design

Optimization of Submerged Fermentation Conditions for Longan Vinegar Production

Optimization Of Fermentation Conditions Of Mead By Response Surface Methodology

Optimization of Fermentation Process of Compound Chinese Medicine by Response Surface Methodology

Optimization of Wild Psidium Guajava Liquor Fermentation Technological Conditions via Response Surface Methodology

Optimization of Fermentation Process for Onion Wine by Response Surface Methodology

Optimization of fermentation technology of pomelo wine

Optimization of fermentation conditions for passion fruit wine by response surface methodology

Optimization of fermentation conditions of kiwi base wine by response surface methodology

Research on Stability of Composite Fruit Vinegar of Apple and Pomelo

Optimization of Fermentation Technology and Determination of Physicochemical Properties of Pure Malt Wine

Optimization of Process Parameters for Alcoholic Fermentation of Jujube Juice