Abstract:The C=C double bonds in the main chain of hydroxyl-terminated polybutadiene (DHTPB), obtained by the degradation of polybutadiene rubber, were partially epoxided using m-chloroperoxybenzoic acid (mCPBA) as epoxidation reagent. A series of epoxided HTPBs (EHTPB) with different epoxy contents (5%, 10% and 15%) were prepared by tuning the molar ratio of mCPBA to C=C double bonds. The structures of EHTPBs were characterized by Fourier transform-infrared (FTIR), nuclear magnetic resonance (H-1-NMR) spectroscopy and gel permeation chromatography (GPC). The epoxy percent in EHTPBs from H-1-NMR spectra was in accordance with the design. In addition, a series of EHTPB-based polyurethane elastomers (EPU) were prepared by the reaction between EHTPB and 4,4'-diphenylmethane diisocyanate with 1,4-butanediol as a chain extender. Mechanical and thermal properties of the EPU samples were characterized by tensile test, differential scanning calorimetry (DSC) and thermal gravity analysis (TGA). With increased epoxy percent in EHTPB, the Young's modulus and the tensile strength of the EPU samples increased, whereas the elongation at break decreased. The sample EPU10 prepared with 10% of epoxy had the best mechanical properties with 8.82 MPa as Young's modulus, 7.83 MPa as tensile strength, and (485 +/- 23)% as elongation at break. The elasticity recovery of the EPU sample was slightly better than HTPB-based PU (EPU0). The results with TGA test showed that the thermal degradation of EPU, similar to EPU0, was divided into three stages. However, the EPU samples had better thermal stability with the initial degradation temperature at 210 degrees C, about 30 degrees C higher than that of EPU0. The DSC results showed that the glass transition temperature (T-g) of EPU gradually increased as epoxy percent was increased, though still lower than that of HTPB (FHTPB) based PUs prepared by free-radical polymerization.

Analysis and Characterization of Rubber Seed Oil

Preparation and Properties of Epoxided Hydroxyl-terminated Polybutadiene Based Polyurethane Elastomers

Study on Saponification Technology of Hippophae Rhamnoides L.seed Oil

Sintesis De Poliuretanos a Partir De Polioles Obtenidos a Partir Del Aceite De Higuerilla Modificado Por Transesterificación Con Pentaeritritol

<title language="spa">Sintesis de poliuretanos a partir de polioles obtenidos a partir del aceite de higuerilla modificado por transesterificación con pentaeritritol Polyurethanes sintetized of polyols obtained from castor oil modified by transesterification with pentaerythritol

Evaluation of Octyltetramethyldisiloxane‐Containing Ethylene Copolymers As Composite Lubricant for High‐Density Polyethylene

Estudio De Las Propiedades Mecánicas, Térmicas, Reológicas Y Morfología De Poliuretanos a Partir De Aceite De Higuerilla Modificado Por Transesterificación

Extraction of Rosa Laevigata and Analysis of Its Fatty Acid Components

Synthesis of Vegetable Oil Based Polyol with Cottonseed Oil and Sorbitol Derived from Natural Source

Preparation of Vegetable Oil Based Polyols and Their Applications in Polyurethane Adhesives

Preparation and Properties Research of Oil-absorbing Rubber

Preparation of Bio-Lubricating Base Oils from Rapeseed Oil

Network Structure and Properties of Polyurethanes from Soybean Oil

Optimisation of Epoxide Ring-Opening Reaction for the Synthesis of Bio-Polyol from Palm Oil Derivative Using Response Surface Methodology

Polyols from castor oil (Ricinus communis) and epoxidized soybean oil (Glycine max) for application as a lubricant base

Structural regulation and property balancing of ethylene‐propylene‐diene monomer‐based‐ oil‐absorbing expandable rubber modified with flexible α‐olefins

Esterification of High-Acid Value Oil

Enzyme-catalyzed synthesis and properties of polyol ester biolubricant produced from Rhodotorula glutinis lipid

Biorefinery methods for extraction of oil and protein from rubber seed

Cleavable Polybutadiene Rubber: A Versatile Precursor to Hydroxyl-Terminated or Multi-Hydroxyl Polybutadiene and Polyethylene