Hydrolysis of corn stalks by microwave-assisted acid pretreatment
LI Hongyan,ZHANG Zengqiang,LI Ronghua,CHEN Xiaocui,GAO Jinming
DOI: https://doi.org/10.3321/j.issn:0253-2468.2009.12.013
2009-01-01
Abstract:The disposal and reclamation of corn stalks is important in agriculture,resource use and environmental protection.The corn stalk is composed of core、leaves and skin with different contents of cellulose、hemicellulose and lignin,so it can be used as a raw material for fuel ethanol production.In this study,we investigated the suitable parts of corn stalks as the raw material for the fuel ethanol production under microwave-assisted acid hydrolysis.Microwave-assisted acid hydrolysis could help to remove the hemicellulose that is in close connection with the lignin and cellulose,facilitating the subsequent hydrolysis of cellulose.Corn stalk leaves、skin and core were separated,ground,and treated with dilute sulfuric acid under microwave radiation(2450 MHz,1000 W) and the hydrolysis conditions were evaluated.The effect of sulfuric acid concentration,temperature,time,ratio of material to liquid and stirring speed were evaluated using both single factor and orthogonal experiments.The results showed that for corn stalk leaves,the influences of the treatments were in the order of sulfuric acid concentration > temperature > ratio of material to liquid > time > stirring speed,and the optimal conditions were 5.0%(w/w) sulfuric acid,75 ℃,30 min,1:15 ratio of material to liquid and 800 r·min-1.For corn stalk cores,the influences of the treatments were in the order of sulfuric acid concentration > stirring speed > time > ratio of material to liquid > temperature,and the optimal conditions were 4.0%(w/w) sulfuric acid,75 ℃,25 min,1:20 ratio of material to liquid and 1000 r·min-1.For corn stalk skin,the influences of the treatments were in the order of sulfuric acid concentration > time > ratio of material to liquid > temperature > stirring speed,and the optimal conditions were 9.0%(w/w) sulfuric acid,72 ℃,20 min,1:17.1 ratio of material to liquid and 2000 r·min-1.The corn stalk leaves and cores are more suitable for the production of fuel ethanol than corn stalk skins.Overall,the results have significant implication for the fuel utilization of corn stalks.