Determination of Methanol in Red Wine by Flow Injection Spectrophotometry

Lamei MO,Yongsheng LI,Xiufeng GAO

DOI: https://doi.org/10.13746/j.njkj.2016110

2016-01-01

Abstract:A rapid and automated determination method of methanol in red wine by flow injection spectrophotometry had been developed. The principles of such method were as follows:methanol separated from wine samples by distillation, then methanol oxidized by permanganate into formaldehyde and excessive permanganate decolorized with withS2O52-, then formaldehyde reacted with magenta-sodium sulfite and a violet re-action product produced, and the determination operated at the maximum absorption wavelength of 590 nm. Through orthogonal experiments and single factor tests, the optimum technical conditions were obtained as follows: 20 g/L KMnO4, 0.3 mol/L H2SO4(15 % H3PO4), 80 g/L K2S2O5, 3 g/L magenta/sodium sulfite, coloring reaction temperature was at 40℃, sampling volume was 330μL, and the analytic speed was 24 samples/h. The relative standard deviations for 11 repeated determination of methanol (500 mg/L) was 0.6%. Under the optimum conditions, five commercial wine samples were determined by FIA and GC respectively, and their determination results were the same.