Biocomposite Optimization with NaOH-modified Bagasse Fiber, Polybutylene Succinate, and Poly(Lactic Acid) Using RSM Approach
Pei,Rui Zou,Xinyao Wang,Jinyan Liu,Lulu Liu,Xiaoyu Deng,Xuehua Li,Menghui Yu,Jia Tan,Shizhong Li
DOI: https://doi.org/10.15376/biores.18.3.5683-5702
2023-01-01
BioResources
Abstract:Alkali-treated bagasse fiber was used as a process variable for optimization of the properties of polybutylene succinate/poly(lactic acid)based biocomposites using Box-Behnken design (BBD) and response surface methodology (RSM). The optimum conditions for three factors, i.e., NaOH-treated bagasse fiber (0.55 to 1.65 g), polybutylene succinate (1.1 to 2.3 g), and poly(lactic acid) (2.2 to 3.4 g) on the bending strength of biocomposite were investigated. The optimum combination was 0.91 g of NaOH-treated bagasse fiber, 1.14 g of polybutylene succinate, and 3.10 g of poly(lactic acid). The bending strength for NaOH-treated bagasse fiber/polybutylene succinate/ poly(lactic acid) composite was 27.0 MPa, which was 26.0% higher than native bagasse fiber-based composite. The composites were also characterized by thermogravimetric analysis, mechanical testing, Fourier transform infrared, scanning electron microscopy, water absorption, and contact angle tests. Results demonstrated that the bending strength, impact strength, and tensile strength of alkali treated bagasse fiber-based biocomposite increased by 26.0%, 15.5%, and 23.3%, separately, compared with native bagassebased composite after sequential homogenization, compounding, and hot pressing. The hydrophobicity for alkali-treated bagasse fiber/PBS/PLA was also improved. Thus, NaOH-treated biomass materials/biodegradable polymer was judged to be suitable for preparing green composite materials.