Abstract:A two-channel prototype cryogenic temperature transmitter is developed using an ARM Cortex-M3 series precision analog microcontroller using a rapid prototyping method for use in indigenous developments. The developed prototype utilizes an Arduino compatible baseboard equipped with interfaces for programming/debugging. Additional circuits are fabricated, and embedded application software is developed and tested. The input circuit consists of a low-value high accuracy precision current source to excite the cryogenic temperature sensors of Resistance Temperature Detector (RTD) type and employs a standard four-wire ratiometric measurement technique for accurate resistance measurement. The ratiometric measurement eliminates measurement errors due to current uncertainty. The precision microcontroller is equipped with internal programmable gain amplifiers to accurately scale low-level analog signals from cryogenic temperature sensors. The developed transmitter can interface with two cryogenic RTDs (Cernox ® and PT-100 types) and can accurately measure resistance over its calibrated range (300–4 K). The cubic spline interpolation method is employed in application software for converting the measured resistance to temperature. The measured temperature is transmitted to a programmable logic device (via 4–20 mA signals) using the pulse width modulation technique. The developed transmitter is tested for its performance against commercially available transmitters at the liquid nitrogen temperature, liquid helium temperature, and over the entire measurement range using Gifford–McMahon type cryocoolers. The developed transmitter was utilized to assess the impact of the thermal resistance of the cryogenic sensors at the lowest temperature of the cryocooler (∼2.6 K). This paper outlines design details, application software development, experimental setup, measurement uncertainties, and test results.

Multipoint Temperature Measurement System Based on AD590 for the Tank of Fermentable Liquid

System of Numeral Temperature Testing Based on ARM and DS18B20

Implantable passive and wireless telemetering system based on SAW temperature sensor

Design of a Multichannel Dynamic Temperature Measurement System for Developing Thermal Management System of New Energy Vehicles

A CMOS Temperature Sensor with Versatile Readout Scheme and High Accuracy for Multi-Sensor Systems

Design of temperature control box of laser rangefinder based on DS18B20

A Design of the Temperature Test System Based on Grouping DS18B20

Design of a Temperature Transmitter with Contactless Power and Data Transmission

Comparison of Temperature Difference Measurement Technologies Used in Vehicular Heat Exchangers

Design of Human-body Temperature Monitoring System Based on MLX90614 and ZigBee

Kiln Temperature Wireless Data Acquisition System Based on Nrf905

Design, development, and qualification tests of prototype two-channel cryogenic temperature transmitter

High precision temperature measurement system based on multichannel current acquisition

Design of a scalable microfiber optic temperature transmitter based on fluorescence lifetime

Multi-channel Temperature Monitoring System Based on MCU

A design of digital temperature measurement based on platinum resistance

Design of High Precision and Multiple Channel Temperature Measuring System Based on SPCE061A

Design of Temperature Data Acquisition and Information Processing System based on Mathematical Method

Development of Temperature Collecting System Based on A/D Converter MAX1415

Design of Water Bath Temperature Control System Based on DS18B20

Low-Cost Wireless Temperature Measurement: Design, Manufacture, and Testing of a PCB-Based Wireless Passive Temperature Sensor