Study on Dyeing of Silk Fabrics with A-bromoacrylamide Reactive Dyes

王海峰,邵建中,王光明

DOI: https://doi.org/10.3969/j.issn.1001-7003.2005.01.014

2005-01-01

Abstract:Through measuring exhaustion,fixation, totalfixation ofsilk, wooland cotton, which aredyed by a-bromoacrylamide reactive dyes in different temperaturesand pHvalues, theoptimum processing on silk fabrics is decided.

What problem does this paper attempt to address?

Dyeing Behaviors of Hetero Bi-Functional Reactive Dyestuffs on Silk and Wool Fabrics

Yan DING,Jian-zhong SHAO,Min SHAO

2010-01-01

Abstract:Different dyeing behaviors of silk and wool with hetero bifunctional reactive dyes at different temperatures and pH values were studied.The process conditions were optimized by comparative experiments of dye up-take,fixation and total fixation efficiency.The results showed that the best dyeing conditions of silk fabric were pH value 8~9,temperature 60~70 ℃;the best dyeing conditions of wool fabric were pH value 4~5,temperature 80~90 ℃.Silk fabric could be dyed with hetero bifunctional reactive dyes at a broad range of pH value.The total fixation efficiency of silk fabric under alkaline conditions was slightly higher than that of acidic conditions,while the total fixation efficiency of the wool dyeings in acidic conditions was much higher than that of alkaline condition.
Modification of silk with aminated polyepichlorohydrin to improve dyeability with reactive dyes

Xie Weibin,He Jinxin,Chen Shuilin,Chen Guoqiang,Peng Taozhi

DOI: https://doi.org/10.1111/j.1478-4408.2007.00065.x

2007-01-01

Coloration Technology

Abstract:Reactive dyes have almost complete exhaustion and ideal fixation on aminated polyepichlorohydrin pretreated silk without addition of salt or alkali. The effects of varying pretreatments and dyeing conditions were studied. The dyeing behaviour of CI Reactive Red 15 on modified silk under pH 6 was investigated. Dyeings of modified silk showed good wash fastness, dry and wet rub fastnesses as well as light fastness. The quality of the dyed silks obtained after pretreatment was shown to be satisfactory and the dyeing effluent was less polluted.
Relations Between Silk Surface Structure and the Dyeing Performance of the Reactive Dyes

Christopher M Carr

DOI: https://doi.org/10.3969/j.issn.1005-9350.2003.05.002

IF: 2.3

2002-01-01

Textile Research Journal

Abstract:Silk fabrics were treated with high temperature, simulated sunlight and enzyme respectively. The exhaustion, fixation and total fixation efficiency of the reactive dyes on the pre - and post - treated silk fabrics were determined. The color depth of the dyed silk fabrics was determined as well. The microstructure of the treated silk fibroin and the tyrosine content on the treated silk surface have been studied using Fourier transform infrared spectroscopy coupled with second derivative spectral analysis(FTIR - ATR). The influence of high temperature, simulated sunlight and enzyme treatments on the content of the amino acids with nucleophilic groups on silk fibroin has been investigated using amino acid analysis. The results indicate that both the dyeing performance of the reactive dyes on the treated silk and the color depth of the dyed silk fabrics deteriorated after treatments, and that the decrease in the tyrosine content and the changes in the microstructure of the treated silk fibroin caused the deterioration in the dyeing performance of the reactive dyes on the treated silk fabrics.
Study on the Reaction Behavior of Silk Fibroin with Monochlorotriazine Reactive Dyes by HPLC Analysis

Min SHAO,Jianzhong SHAO,Jinqiang LIU,Qinguo FAN

DOI: https://doi.org/10.3321/j.issn:0253-9721.2007.06.022

2007-01-01

Abstract:Using lsopropyl amine,p-methyl-phenol and methanol for simulating the amino,phenol and hydroxyl groups of silk fibroin respectively,the reaction of monochlorotriazine reactive dyes with nucleophilic groups of silk fibroin was studied with high-performance liquid chromatography(HPLC).The results showed that the reaction of monochlorotriazine reactive dyes with nucleophilic group of silk fibroin varies with different types of nucleophilic group with optimal reaction conditions at about 85℃and pH= 8 ~ 9 for the phenol group,and 95℃and pH= 9 for the amino group.However,for the hydroxyl group,more strong basic condition is preferred.Besides,taking into consideration the content and distribution of nucleophilic groups of silk,it was deduced that monochlorotriazine reactive dyes were suitable for dyeing silk under the conditions of 85~95℃and pH=8~9,and in respect of the effect of reacting with monochlorotriazine reactive dyes,phenol groups occupied the first place,followed by amino groups,while hydroxyl groups,negligible.
Ultrasonic dyeing of polylatic acid blended fabric

XU Li-Juan,FU Zhong-Jun,ZHAO Yan,YU Lu-Shan

2009-01-01

Abstract:Dyeing behaviors of polylatic acid blended fabric assisted with ultrasonic wave were studied,the results were compared with those of conventional dyeing.Effects of ultrasonic wave on dye liquor and fabric were analyzed by scanning electron microscopy(SEM),X-ray diffraction(XRD)and laser particle size analyzer.The results showed that ultrasonic treatment could break the micelles of disperse dyes,therefore,dye uptake and K/S value could be increased.After ultrasonic treatment,the fabric had no obvious etching on surface nor changes in α crystalline form,and only a little decrease in strength and intensity of diffraction.
Study of Hydrolytic Kinetics of Vinyl Sulfone Reactive Dye in Siloxane Reverse Micro-Emulsion

Liujun Pei,Juanjuan Liu,Guoqiang Cai,Jiping Wang

DOI: https://doi.org/10.1177/0040517516671123

IF: 2.3

2016-01-01

Textile Research Journal

Abstract:Reactive dyes maintain a long reaction with fiber and show a high dye uptake and fixation rate, and effectively decrease the dyeing waste water in siloxane reverse micro-emulsion. However, little research has been carried out into the hydrolysis reaction of reactive dyes in reverse micro-emulsion. In this study, Reactive Blue 19 was selected as a model vinyl sulfone reactive dye to study its hydrolysis in siloxane reverse micro-emulsion. The hydrolysis reaction was analyzed using high performance liquid chromatography. The results show that the hydrolysis rate of vinyl sulfone dyes in siloxane reverse micro-emulsion was slower than that in a traditional bath. Influences due to the ratio of aqueous dye solution to siloxane, non-ionic surfactant, cellulose fiber, and temperature on the hydrolysis reaction of vinyl sulfone reactive dye were also researched. The results show that with more aqueous solution emulsified in the siloxane media, the hydrolysis reaction of vinyl sulfone dye is faster. Reactive dyes were emulsified into a water micro-environment with non-ionic surfactant, which formed reverse micro-emulsion, and decreased the content of free water; this further influenced the hydrolysis of reactive dye.
Dyeing Behaviors of Silk/pla Mixture with Disperse Dyestuffs

Guoqiang Chen

2011-01-01

Abstract:Twenty-five disperse dyes are employed to dye silk/PLA mixture,the distribution of dyes on silk and PLA components and the influence of reduction clearing on color depth of silk are investigated,and the color fastness of the dyeings to washing and light are determined.The amounts of the adsorption of disperse dyes,especially azobenzene ones,on silk are found to be higher than those on PLA.It is difficult for the staining of disperse dyes on silk to be removed by alkaline and acidic reduction clearing.Most disperse dyes on silk/PLA dyeings exhibited good light fastness,low color change in fastness to washing,and low polyester staining of fastness to washing.Silk staining of fastness to washing is dependent on individual dyes.Silk/PLA mixture can be dyed with the reasonably selected disperse dyes according to the demands for color fastness.
Studies on Crosslinking Dyeing of A Series of Crosslinking Dyes by A Crosslinker

Guohua Zhu,Jinli Zhu,Jinming Wu,Yanfeng Tang,Bingtao Tang

DOI: https://doi.org/10.4028/www.scientific.net/amr.441.72

2012-01-01

Advanced Materials Research

Abstract:A series of blue crosslinking dyes EDCD, DTCD, TPCD, PVAmCD and PAAmCD were synthesized by the reaction of 1,4-dihydroxyanthraquinone with ethylenediamine, diethylenetriamine, tetraethylethylenediamine, polyvinylamine and polyallyl amine. These crosslinking dyes can be classified into two kinds, i.e. small crosslinking dyes and polymeric crosslinking dyes. These dyes were crosslinked to cotton via covalent bond by a new crosslinker NSC prepared from 4,5-diamino-2,7-naphthalenedisulphonate and cyanuric chloride. The effects of crosslinking dyeing conditions, such as NSC concentration, curing temperature and pH of crosslinking bath on the dye fixation were investigated in detail. At optimum conditions, the fixations of EDCD, DTCD, TPCD, PVAmCD and PAAmCD using NSC as a crosslinker on cotton were 91.2%, 95.6%, 99.1%, 99.4% and 99.2%, respectively. The wrinkle recovery of crosslinking dyeing was also studied. These results indicated that the polymeric crosslinking dyes showed better performance than the small ones.
Dyeing of Tussah Silk with Reactive Dyes: Dye Selection, Dyeing Conditions, Dye Fixation Characteristics, and Comparison with Mulberry Silk

Yingjie Yu,Rencheng Tang

DOI: https://doi.org/10.3390/molecules29051151

IF: 4.6

2024-03-05

Molecules

Abstract:Tussah silk is one of the most widely used wild silks. It is usually dyed with acid dyes, despite the shortcoming of poor wet fastness. Reactive dyeing is a good solution to this problem. In our work, sulfatoethylsulfone (SES), sulfatoethylsulfone/monochlorotriazine (SES/MCT), monochlorotriazine (MCT), and bis(monochlorotriazine) (Bis(MCT)) dyes were used to dye tussah silk. All of these dyes showed lower exhaustion and fixation on tussah silk than on mulberry silk under alkaline conditions. Among them, SES dyes were more applicable, with a fixation of 70–85% (at 4%owf dye) at 90 °C when using sodium bicarbonate as an alkali. SES dyes also showed a rapid fixation speed. The dyeing of tussah silk required lower sodium bicarbonate dosage, the use of more neutral electrolytes, and a higher dye quantity to achieve deep effects compared to mulberry silk. Dyed tussah silk displayed lower apparent color depth and brilliance than dyed mulberry silk. The neutral boiling dyeing of tussah silk with SES dyes exhibited higher exhaustion, higher fixation (82–92% at 4%owf dye), and a slower fixation speed compared with alkaline dyeing. Furthermore, in this dyeing method, SES dyes showed higher and more efficient fixation on tussah silk than on mulberry silk. All dyed tussah silk had excellent color fastness to soaping.

chemistry, multidisciplinary,biochemistry & molecular biology
Study on Fading Behavior of Reactive Black 5 DyedFabrics in Washing Process

郭立云,蔡国强,何美林,王际平

DOI: https://doi.org/10.3969/j.issn.1673-3851.2017.05.004

2017-01-01

Abstract:Domestic washing is a complicated physical-chemical process.Dye loss and color fading of the reactive dyed fabric will happen due to several factors during the washing process.In this paper, the effects of five factors (the concentration of detergent, hardness of water, residual chlorine content in water, mechanical force (the number of steel balls) and bath ratio) in washing process on the dye loss and color fading behavior of fabric were investigated by using orthogonal experiment.UV-Vis was applied to measure the quantity of free dye in the residual washing liquid, and the influence of various factors on color difference was investigated through measuring K/S value and color difference (ΔE) before and after washing.Results show that the concentration of detergent and bath ratio have great influence on the dye loss of fabric, while the mechanical force (the number of steel balls) and residual chlorine have little influence.After washing for 3 times, mechanical force is the major factor influencing K/S value of fabric.Meanwhile, mechanical force (the number of steel balls) most significantly affects the color difference value (ΔE) of fabric after and before washing.
A Study on the Dyeing Thermodynamics of PLA Fibers

GUO Shen,FU Zhong-jun,YU Lu-shan,Ma Qing-xia

2008-01-01

Abstract:The influence of three kinds of auxiliaries on dyeing thermodynamic parameters of PLA knitted fibers with disperse dye(C.I.Disperse Red 74)were studied.The results show that the kind of adsorption belongs to Nernst adsorption, adsorb corresponds to distributing mechanism. Adsorption isotherms of PLA knitted fiber was made, and the effective absorption volume (Var) was determined.On the basis of experimental results, the dyeing affinity,dyeing heat and dyeing entropy were calculated.The results indicated that the dyeing affinity at high temperature was more higher than at low temperature.
A Non-Aqueous Dyeing Process of Reactive Dye on Cotton

Chengchen Fu,Jiping Wang,Jianzhong Shao,Dongjie Pu,Jiamei Chen,Jinqiang Liu

DOI: https://doi.org/10.1080/00405000.2014.906103

IF: 1.7698

2015-01-01

Journal of the Textile Institute

Abstract:Based on previous work, the feasible method for dyeing cotton with reactive dye in dye/decamethyl cyclopentasiloxane (D5) suspension system was re-established by increasing the system stability using selected surfactants, and taking the color depth (K/S value) as the evaluation index, the dyeing process parameters such as temperature, dyeing duration, pick-up ratio of alkali solution on fabric, as well as the alkali concentration were optimized further for setting up dyeing conditions. The dyeing results produced by new method showed that the dye uptake could reach nearly 100% without any salt as accelerating agent. Since just a little water was used in the process, hydrolysis of reactive dyes was restrained, fixing rate was increased, and the apparent color depth of the dyed sample was much better than traditional water bath dyeing. The washing fastness and rubbing fastness of samples were satisfactory.
Synthesis and application of a fixing agent applied to acid dyes

WANG Li,ZHOU Xiang-dong,SHI Ya-peng,ZHANG Hai-ling

DOI: https://doi.org/10.3969/j.issn.1004-0439.2012.04.004

2012-01-01

Abstract:A fixing agent SBNF with sulfonic group for acid dyes was synthesized using bisphenol A,2-naphthol,formaldehyde as the main raw materials.The influences of reactant mass ration,reaction time and temperature,the dosage of fixing agent,fixing time,pH of fixing solution on the fixation effect were discussed.The synthesis process and application technology were optimized and the optimum synthetic process was as follows: m(sulfonation intermediateⅠ)∶m(sulfonation intermediateⅡ)∶m(formaldehyde)=2.0∶1.0∶1.0,reacted at 100 ℃ for 6 h;and the optimal application technology was: 2.5%(owf) of SBNF fixing agent,10%(owf) of formaldehyde scavenger,pH=3.0,fixed acid dyed polyamide fabric at 80 ℃ for 30 min.The fixed fabric had fairly good color fastness,such as 3~4-level to wet rubbing,4-level to dry rubbing and 4-level to soaping.
Synthesis of Acid Dyes Containing Polyetheramine Moieties and Their Low-Temperature Dyeing Properties on Wool Fiber

Haiying Wang,Guowei Wang,Chunlin Zheng,Tijian Zhou,Jie Sun

DOI: https://doi.org/10.1002/app.45793

IF: 3

2017-01-01

Journal of Applied Polymer Science

Abstract:ABSTRACTTo realize the low‐temperature dyeing of wool fibers, the use of auxiliaries and wool modification are common methods. Low‐temperature auxiliaries may cause water‐pollution problems, and wool modification is a costly and uncontrollable process. In this study, new acid dyes, named D1–D3, containing polyetheramine groups were synthesized and applied to wool fiber by conventional and low‐temperature exhaust dyeing procedures. The results indicate that the new acid dyes could interact with wool‐fiber‐like auxiliaries and render a high exhaustion rate to the wool fiber at a dyeing temperature of 80 °C. In comparison with Acid Blue 25, the D1–D3 dyes showed an increased dyeing rate, especially under a dyeing temperature of 80 °C. Despite the bigger relative molecular masses of D1–D3, the exhaustion rates of D1–D3 were still higher, and the times of half‐dyeing were shorter than that of Acid Blue 25. The color differences between the wool fabrics dyed with the four dyes at 80 and 98 °C, respectively, were compared. We found that the color differences of D1–D3 between 80 and 98 °C were smaller than that of Acid Blue 25. The interactions between the dyes and wool fiber were analyzed and manifested by the measurement of the ζ potential of the dyes and wool fiber. The leveling and transfer properties of the D1–D3 dyes were also investigated, and the color differences of the wool fabrics dyed with Acid Blue 25, D1, and D2 were very low at all measured pH values and temperatures. The fastnesses of D1–D3 on wool fabric were almost the same as that of Acid Blue 25. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018, 135, 45793.
Innovative isolation of colorant from Butea Monosperma for surface-modified silk dyeing

Shahid Adeel,Shafqat Abbas,Noman Habib,Manel Ben Ticha,Fatima Batool,Rony Mia

DOI: https://doi.org/10.1680/jsuin.22.01016

IF: 2.397

2022-06-17

Surface Innovations

Abstract:Recently, there has been a surge of interest in adopting natural dyes to avoid the environmental difficulties connected with the synthetic coloring compounds. This research focuses on extracting natural dyes from Butea Monosperma plants and on developing sustainable dyeing methods for silk fabric. Natural colorants were extracted using an aqueous and acidic extraction procedure, and the silk fabric was dyed with the extracts using mordanting with a variety of metal and bio mordants. The treatment of fabric and extracts were carried out using microwave irradiation. It was found that after irradiation up to 3 min, the acidic extract shown maximum color strength onto fabric. It was also observed that the acacia and pine-nut hull at 80 °C and before dyeing pomegranate extract at 80 °C and after dyeing of silk fabric at 40 °C using bio-mordants were higher color strength than metallic mordant. For comparative analysis Al salt at 40 °C, Iron salt at 60 °C and tannic acid (T.A.) at 80 °C were provided acceptable results. The color fastness characteristics were also found good to excellent. The bio-mordants not only provide the higher color strength and fastness properties, it was also an environmental friendly approaches. Scanning electron microscopy (SEM) images and Fourier transform infrared spectroscopy (FT-IR) analyses revealed the difference between irradiated and un-irradiated silk fabric. Therefore, it is recommended that MW rays and bio-mordants be used in the natural dyeing of silk fabric because of their deformability and non-toxicity, as well as their high color fastness and color strength properties.

chemistry, physical,materials science, coatings & films
Experimental and Theoretical Study of Madder-Associated Dyestuffs on Silk: Adsorption of Kinetics, Thermodynamics and Molecular Docking

Yujie Guo,Xudong Zhou,Lingfan Zhang,Xiyun Luo,Mengqi Wu,Wenqing Zhang

DOI: https://doi.org/10.1080/15440478.2024.2324302

2024-03-19

Journal of Natural Fibers

Abstract:In this work, dyed samples were self-prepared from two methods including madder dyeing and mordant dyeing by madder combined with Al 3+ at different temperatures, and their kinetics and isothermal adsorption were both discussed. Weber–Morris diffusion model and Freundlich model were found to be more suitable in dyeing for kinetics and thermodynamics. Through SEM, FTIR and fastness tests, the dyeing performances were displayed and the possible structure between madder dyes and the complex with Al 3+ were illustrated. By molecular docking, madder dyes showed combination with glutamic acid predominantly. After introducing metal ion, the shortage of hydrogen bonds length was observed. It was initially employed to elucidate the potential binding modes between dyes and proteinaceous fibers. Overall, through experimental dyeing and curve fitting, this study provided insights into the dyeing mechanism of madder-associated dyestuffs on silk. Moreover, molecular docking elucidated the dyeing mechanism further, highlighting that the presence of metal ion enhances the firmness of the staining. The elucidation of dyeing mechanism not only provided valuable theoretical support for color restoration but also shed light on the practically modify of methods in obtaining ideal color. These results could serve as inspiration for conservators to maintain the vibrancy and longevity of dyed silks. 本工作采用茜草染色和茜草与Al 3+ 在不同温度下进行媒染剂染色两种方法制备了染色样品,并对其动力学和等温吸附进行了讨论. Weber-Morris扩散模型和Freundlich模型在动力学和热力学方面更适合染色. 通过SEM、FTIR和牢度测试,展示了茜草染料的染色性能,并说明了茜草与Al 3+ 配合物之间可能的结构. 通过分子对接,茜草染料主要与谷氨酸结合. 引入金属离子后,观察到氢键长度不足. 它最初用于阐明染料和蛋白质纤维之间的潜在结合模式. 总之,通过实验染色和曲线拟合,本研究深入了解了茜草类染料在丝绸上的染色机理. 此外,分子对接进一步阐明了染色机制,强调了金属离子的存在增强了染色的牢固性. 对染色机理的阐明,不仅为色彩恢复提供了宝贵的理论支持,而且也为实际改进获得理想色彩的方法提供了参考. 这些结果可以为保护人员保持染色丝绸的活力和寿命提供启发.

materials science, textiles
Improved reactive dye fixation on ramie fiber in liquid ammonia and optimization of fixation parameters using the Taguchi approach

Yingjie Cai,Yonghong Liang,Rahul Navik,Wenju Zhu,Cong Zhang,Nahid Pervez,Qiang Wang,Md. Nahid Pervez

DOI: https://doi.org/10.1016/j.dyepig.2020.108734

IF: 5.122

2020-12-01

Dyes and Pigments

Abstract:<p>Dyeing in liquid ammonia has the advantage of penetrating the reactive dye molecules inside the fiber structure by modifying the cellulose supramolecular from a crystalline to amorphous form. However, the dye fixation rate of the baking treatment is unsatisfactory (29.45%). In this study, ramie yarn hanks were dyed in liquid ammonia, and cationic fixation auxiliary silicone micro-emulsion was used to fix the dye molecules in the fibers to improve the dye fixation rate and fastness properties. The fixation parameters were optimized using the Taguchi approach. The optimum conditions of the cationic fixation auxiliary mass, fixation time, and water content with four levels on the fixation rate were investigated using an L<sub>16</sub> orthogonal array. The larger-the-better signal-to-noise ratio was applied to maximize the responses of the parameters. The main effect and interaction plot of several factors were analyzed, with results suggesting that the mass of the cationic fixation auxiliary is the most influential parameter for the fixation of the reactive dye (P<0.05). A fixation rate for the reactive dye of 52.82 % ± 0.5 % was observed under the optimal conditions. The color uniformity, wash fastness and rubbing fastness of the dyed sample treated by the cationic fixation auxiliary silicone micro-emulsion were exceptional.</p>

engineering, chemical,chemistry, applied,materials science, textiles
Reaction Kinetics Of Monochlorotriazine Reactive Dyes With Neucleophilic Groups In Silk By High Performance Liquid Chromatography

Shao Min,Shao Jian-Zhong,Liu Jiu-Qiang,Li Ping

DOI: https://doi.org/10.3321/j.issn:0253-3820.2009.07.010

IF: 1.193

2009-01-01

Chinese Journal of Analytical Chemistry

Abstract:Using Isopropyl amine (0.003 mol/L), p-methyl-phenol (0.03 mol/L) and methanol (1 mol/L) for simulating amino groups, phenols groups and hydroxyl groups in silk fibroin respectively, the reaction rate of different nucleophilic groups in silk with monochlorotriazine reactive dye was studied at various temperature and pH by high performance liquid chromatography. It was found that the overall reaction rate of dyes' phenolysis was by far higher than that of ammonolysis and alcholysis on the conditions of 70 - 95 degrees C and pH = 8 - 10. The phenolysis overall reaction rates of C.I. reactive red 24 and C.I. reactive orange 2 were 8.5 and 12.5 times of their ammonolysis', and 23 and 50 times of their alcoholysis' in the term of pH 9 and 95 degrees C. The phenolysis efficiencies of those two dyes were 47.4 and 96.3, the ammonolysis efficiencies were 4.6 and 6.9, and the alcoholysis efficiencies were only 1. Using a mixture (1:10:100, v/v) of isopropyl amine, p-methyl-phenol and methanol to simulate the silk fibroin, the reaction selectivity between the monochlorotriazine reactive dyes and nucleophilic groups in silk fibroin was investigated. It was deduced that monochlorotriazine reactive dyes are suitable for dyeing silk on the conditions of about 85 degrees C and pH = 8 - 9, and under this condition, phenol groups are the major in silk dyeing with monochlorotriazine reactive dyes, amino groups are the minor groups, and the contributions of hydroxyl groups can be neglected.
Molecular dynamics study on structural modulation and dyeing property optimization of meta-aramid in a DMSO/electrolyte system

Yan Zhuo,Kuang Wang,Lin Hou,Jianli Liu,Zhengke Fan,Yizheng Fu,Aixue Dong,Bo Zhu

DOI: https://doi.org/10.1016/j.jcis.2024.06.149

2024-06-21

Abstract:Meta-aramid (PMIA) fabrics are typically problematic to dye owing to their extremely crystalline structure and high compactness. Herein, Dimethyl sulfoxide (DMSO) and electrolyte as hydrogen bond regulators were selected to improve the dyeability of PIMA dyed with cationic dyes. The PMIA shows both high dyeing and mechanical properties as a result of the synergistic effect of DMSO and electrolyte in the system, which destructs hydrogen bonding networks and increase interaction energy density between dye molecules and PMIA, confirmed by a series of characterization and molecular dynamics simulations. In the DMSO/NaCl/PMIA system, while maintaining excellent mechanical (breaking strength and elongation at break of 24.6Mpa and 37.6 %, respectively) and thermal properties, PMIA not only obtained the best dyeability, increasing the Dye uptake from 20 % to 70.62 % and the K/S value from 2.92 to 18.02, but also achieved excellent colour fastness (fastness to dry and wet rubbing, fastness to light, and fastness to washing of 4-5, 3-4, 3-4 and 4-5, respectively). Simulated results and experimental data verified that the DMSO/NaCl system optimally synergizes hydrogen bond regulation for PMIA and achieves the best dyeing effects for cationic dyes, manifesting its great potential in the PMIA wearability area.
Application of natural dyes from selected indigenous plants on cotton and silk fabrics

R. Byamukama,P. Wanyama,Janani Loum

DOI: https://doi.org/10.15406/JTEFT.2021.07.00270

2021-04-28

Journal of Textile Engineering & Fashion Technology

Abstract:Standard procedures for mordant dyeing were used to dye plain weave cotton and silk fabrics with dye from four selected indigenous plants viz: A. coriaria, V. paradoxa, M. lucida and H. madagascarensis. Alum and ferrous sulphate mordants were with the following mordanting methods; pre, simultaneous and post mordanting. Color fastness was used as a basis to evaluate the performance of each method. Color strength imparted on fabric was used as a basis to optimize the following selected dyeing variables viz: temperature, dyeing time, material to liquor ratio (M:L), and mordant concentration (o.w.f). Mordant dyeing under optimized conditions improved color strengths and fastness on both cotton and silk fabrics. According to the optimized variables, silk fabrics required a little more heating (80˚C to 95˚C) for a longer time (≈ 1hr 30mins) than cotton to achieve optimal strengths of color. The fastness obtained for various fastness characteristics on both fabrics dyed under optimized conditions varied from fairly good (3) to excellent (5) with cotton giving better fastness. However, silk recorded better color strength in term of k/s values in the range of (110 to 260) and more lustrous appearance was observed on it. Dye from M. lucida plant species recorded overall superior color characteristics on both fabrics and with both mordants.

Biology,Materials Science

Study on Dyeing of Silk Fabrics with A-bromoacrylamide Reactive Dyes

Dyeing Behaviors of Hetero Bi-Functional Reactive Dyestuffs on Silk and Wool Fabrics

Modification of silk with aminated polyepichlorohydrin to improve dyeability with reactive dyes

Relations Between Silk Surface Structure and the Dyeing Performance of the Reactive Dyes

Study on the Reaction Behavior of Silk Fibroin with Monochlorotriazine Reactive Dyes by HPLC Analysis

Ultrasonic dyeing of polylatic acid blended fabric

Study of Hydrolytic Kinetics of Vinyl Sulfone Reactive Dye in Siloxane Reverse Micro-Emulsion

Dyeing Behaviors of Silk/pla Mixture with Disperse Dyestuffs

Studies on Crosslinking Dyeing of A Series of Crosslinking Dyes by A Crosslinker

Dyeing of Tussah Silk with Reactive Dyes: Dye Selection, Dyeing Conditions, Dye Fixation Characteristics, and Comparison with Mulberry Silk

Study on Fading Behavior of Reactive Black 5 DyedFabrics in Washing Process

A Study on the Dyeing Thermodynamics of PLA Fibers

A Non-Aqueous Dyeing Process of Reactive Dye on Cotton

Synthesis and application of a fixing agent applied to acid dyes

Synthesis of Acid Dyes Containing Polyetheramine Moieties and Their Low-Temperature Dyeing Properties on Wool Fiber

Innovative isolation of colorant from Butea Monosperma for surface-modified silk dyeing

Experimental and Theoretical Study of Madder-Associated Dyestuffs on Silk: Adsorption of Kinetics, Thermodynamics and Molecular Docking

Improved reactive dye fixation on ramie fiber in liquid ammonia and optimization of fixation parameters using the Taguchi approach

Reaction Kinetics Of Monochlorotriazine Reactive Dyes With Neucleophilic Groups In Silk By High Performance Liquid Chromatography

Molecular dynamics study on structural modulation and dyeing property optimization of meta-aramid in a DMSO/electrolyte system

Application of natural dyes from selected indigenous plants on cotton and silk fabrics