Abstract:The design seismic base shear was obtained from the spectral elastic acceleration Sa divided by a system behavior factor R, accounting for ductility and overstrength. The behavior factor is currently taken as a constant for a given type of structures in various codes regardless of structural periods. In fact, the behavior factor is also a spectrum varying with the natural periods of structures. In order to understand the relationship between the spectral values and the corresponding characteristic periods in these two spectra, Sa and R, this article carries out an investigation into the characteristic periods of 370 seismic ground motions from 4 site types. It is found that the periods Tga at which the peak values appear in the Sa spectra are much less than the periods TgR at which the R spectra take a maximum value. Two characteristic periods are necessary to determine the seismic action if a more elaborate procedure is required in practice. Statistical study on these two periods is carried out for the 370 records, and results are presented. For site types A-D, the ratio of these two periods has a statistically averaged value of 5.5-6.7. The maximum input energy SEI, relative velocity Sv, power density PSD, and the Fourier amplitude FS spectra were constructed to determine their characteristic periods, respectively. These four spectra predict similar characteristic periods to TgR. TgR is very close to the characteristic period Tgd of the elastic displacement spectra. Analysis of SDOF systems under combined harmonic excitations shows that the Sa spectrum is more sensitive to high-frequency excitations, while the displacement spectrum is more sensitive to long period excitations. For the elastic-plastic Sa spectra, peak values tend to appear at shorter periods even the amplitudes of the longer periods are greater than that of the shorter period. This provides an explanation on different characteristic periods in the Sa and R spectra.

The modification method of seismic design spectra according to total and instantaneous input energy

An investigation of characteristic periods of seismic ground motions

A new average response spectrum method for linear response analysis of structures to spatial earthquake ground motions

A displacement design spectral method adapted to the Chinese seismic design code

A New Method of Deriving the Acceleration and Displacement Design Spectra of Pulse-Like Ground Motions Based on the Wavelet Multi-Resolution Analysis

A compatible energy demand estimate considering code-specified design spectra

Design spectra for nuclear power plant based on recent large earthquakes

The synthetic method of seismic waves for the long period ground motion considering the characteristics of real earthquake records

Some thoughts on earthquake action provision in seismic design code

Study on seismic design spectra of near-fault region

A Suggestion to the Vertical Earthquake Action Stipulated in Seismic Design Specification

Ground Motion Bi-Normalized Response Spectrum and Uniform Design Spectral Theory

Perturbation spectrum method for seismic analysis of non-classically damped systems

Analysis on the construction methods of seismic design spectra for nuclear power plants

Divisional Optimized Aseismic Design Spectra for Nuclear Power Plant

CONSTANT DUCTILITY INELASTIC DISPLACEMENT SPECTRUM AND ITS APPLICATION

Ground Motion Response Spectra Through Component Decomposition Method

Characteristics of Response Spectra for Long-Periods of Main-Shock Recordings of the Chi-Chi Earthquake

The study on the energy response spedtrum compa-red with pseudo acceleration spectrum

Seismic Response and Design Method of Single Large Span Structures to Spatially Random Ground Motions

An Analytical Method for Elastic Seismic Response of Structures Considering the Effect of Ground Motion Duration