Abstract:A simplified numerical method was proposed for computing the slip-line field, as well as the associated earth-pressure coefficient, in a cohesionless backfill with an inclined surface lying behind an inclined rough wall. The potential failure zone, in either active or passive cases, was divided into the Rankine zone, which was rigorously obtained by the theory of plasticity, and the transition zone being further divided into a series of triangular slices. Within the transition zone, the theoretical relationship between the inclination of the interslice force and that of the slip surface was established by satisfying the Mohr-Coulomb failure criterion, and equations involving the forces on a typical slice were formulated in accordance with the force and moment equilibrium conditions. An iterative procedure was presented for computing the lateral forces on the wall by adjusting the inclination of the slip surface until the stress condition on the upper boundary of the transition zone was satisfied, resulting in the two families of slip lines. Several examples demonstrate the slip-line field configurations, and the computed earth-pressure coefficients were found to agree fairly well with those of other numerical methods. Practical Applications The determination of earth pressures and the associated critical failure surface play an important role in the design of retaining walls and other problems of geotechnical engineering. Conventional methods are frequently used for this purpose, but the errors involved are sometimes unacceptably large in cases of inclined rough walls. Hence, certain numerical methods have been employed, which, despite their sophistication, have not yet approached exact solutions. This paper presents a simplified numerical procedure for approaching theoretical slip-line fields and earth-pressure coefficients for the most frequently encountered cases of inclined rough walls with inclined cohesionless backfills. With this method, no assumptions need to be made about the shape of the slip surface or the inclinations of the forces acting on the boundaries of the triangular slices, into which the potential slip zone is divided. Furthermore, both the stress equilibrium condition and the Mohr-Coulomb criterion were completely satisfied within the failure zone and on its boundaries. An effective iterative procedure was provided for determining the slip surface location, which converged rapidly, resulting in an approximately theoretical configuration of slip-line field and associated earth-pressure coefficient values if a sufficiently large number of triangular slices were employed.

Method for calculating loosening earth pressure around tunnels based on ellipsoid theory of particle flows

Numerical Modeling of Soil and Structure Behavior for Tunneling in Different Types of Soil

Analysis on the longitudinal deformation of tunnels due to pit excavation considering the tunnel shearing effect

Supporting Pressure for Earth Pressure Balance Tunnel Face Stability when Tunneling is Implemented in Saturated Sandy Soil

Study of Passive Earth Pressures Against Translating Rigid Retaining Walls in Narrow Excavations

Calculation of earth pressure distribution on the deep circular tunnel considering stress-transfer mechanisms in different zones

A Modified Wedge-Prism Model for Calculating the Limit Support Pressure of a Shallow Shield Tunnel Face in Unsaturated Sandy Soil

New Method for Computing Slip-Line Fields and Earth-Pressure Coefficients in Cohesionless Backfills

Research on loosening earth pressure considering the patterns of stress distribution in loosening zone

Three-Dimensional Theoretical Model for Soil Arching with Inclined Slip Surfaces

Study on width coefficients of surface settlement troughs induced by shallow-buried tunneling method

Enhanced Theoretical Approach for Predicting the Tunnel Response Due to Deep Excavation Above

Three-Dimensional Analytical Solution for Passive Limit Support Pressure During Shield Tunnelling

Improved Analytical Solution for Forecasting Overlying Excavation-Induced Tunnel Response

Analytical Method for Predicting Tunnel Heave Due to Overlying Excavation Considering Spatial Effect

Loosening Earth Pressure above Shallow Trapdoor in Unsaturated Soil with Different Groundwater Level

A Method for Calculating Soil Deformation Induced by Shielded Tunneling in Ground Stratum with Cavities

Analytical investigation on the arching effect of tunnel face in sandy ground

Modified Terzaghi Loozening Earth Pressure Based on Theory of Main Stress Axes Rotation

Analytical solutions of limit support pressure and vertical earth pressure on cutting face for tunnels

Effect of tunnelling-induced ground loss on the distribution of earth pressure on a deep underground structure