Performance of continuous flow catalytic ozonation in advanced effluent polishing for wastewater treatment plants

Yanfang Liu,ZhangZhili,Huanhuan Xu,Lei Zhao,Zengli Zhai,Zaixing Li

DOI: https://doi.org/10.3969/j.issn.1002-8471.2017.04.006

2017-01-01

Abstract:To further reduce the residual organic matter in effluent of wastewater treatment plants (WWTPs),the performance of continuous flow catalytic ozonation,with Cu/Y-TS-1 as the catalyst,in advanced effluent polishing was studied.The effects of ozone dosage and contact time on contaminants removal were also investigated.The results showed that the Cu/Y-TS-1 catalyzed ozonation not only could effectively remove the organic matter in the WWTPs' effluent,but also could further reduce the nitrogen content in water under continuous flow operation.The concentrations of COD,dissolved organic carbon (DOC) and NH3-N were reduced from 53.1 mg/L,16.7 mg/L and 7.34 mg/L to 19.5 mg/L,8.8 mg/L and 2.4 mg/L,respectively,under the conditions of contact time at 30 min,ozone flux at 106.3 mg/min,ozone flow rate at 1 L/min,and Cu/Y-TS-1 catalyst dosage at 30 g/L.Compared to the process of ozonation alone,the removal efficiencies of COD,DOC and NH3-N were raised by 16.1 ％,21.3 ％ and 51.1％,respectively.The removal efficiencies of organic matter and ammonia were benefited from the increase of ozone dosage and reaction time.