Abstract:In order to grasp the building palisade structure tightness of indoor particulate matter mass concentration based on the particle penetration mechanism and settlement characteristics, this article analyzes the measurements of two different types of building air tightness of a Shenyang university office building in terms of indoor and outdoor particulate matter mass concentration levels from 2016-1-09 to 1-22, 2016-7-18 to 8-03, and 2017-2-28 to 3-13. The building outside the closed window that had no indoor source condition, the indoor office building and outdoor particle mass concentration, and the aperture size and shape of the envelope were analyzed to carry on the numerical simulation research by Fluent software, which was then analyzed; the results reveal that the measuring point of the I/O ratio is less than point B of the I/O ratio, measurement points of A linear regression fitting degree is lower than the fit of the measuring point B, and the causes for the measuring point A tightness (level 8) is superior to the measuring point B (level 4). When the gap height h is greater than 0.5 mm, the penetration rate of particles within the range of 0.25–2.5 μm particle size is close to 1. In different gap depths, the penetration rate of particles within the range of 0.1–1 μm particle size was close to 1. In diverse pressure difference, the 0.25–2.5 μm particles within the scope of penetration rate P is close to 1, the gap on both sides of the differential value ΔP; the greater the particle, the higher penetration rate. The larger the right-angle number of gap n, the lower the penetration rate of particles. The L-shaped gap and U-shaped gap have significantly better barrier effects in larger and smaller particles than the rectangular gap. The research results in this paper can help people understand and effectively control the influence of outdoor particles on the indoor air quality and provide reference data for the prediction of indoor particle mass concentration in buildings, which has theoretical basis and practical significance.

Review of Inhalable Particles Infiltrating through Building Envelope

Comparison of indoor concentration of PM2.5 between different residences

Review of Relationship Between Indoor and Outdoor Particles: I/O Ratio, Infiltration Factor and Penetration Factor

Test Study About PM2.5 Penetrations Through Building Envelope

Emissions of Indoor Particulate Matter in Civil Buildings: a Review

Study on the Influence of Air Tightness of the Building Envelope on Indoor Particle Concentration

Research Review of Particle Resuspension in Indoor Environments

A Convenient Method to Assess Air Infiltration Rate Using Particle Mass Balance Principle

Analysis of Factors Influencing Indoor Particle Concentration Using the Lumped Parameter Model

Field Study of Infiltration Rate and Its Influence on Indoor Air Quality in an Apartment

Comparison of Infiltration of Different Particle Sizes and Influencing Parameters

The Impact of Indoor Air Humidity on the Infiltration of Ambient Particles

Particulate Pollution in Ventilated Space: Analysis of Influencing Factors.

Indoor Particulate Matter in Urban Households: Sources, Pathways, Characteristics, Health Effects, and Exposure Mitigation

The Experimental Study on Indoor and Outdoor Penetration Coefficient of Atmospheric Fine Particles

NUMERICAL SIMULATION OF PARTICLE PENETRATION THROUGH THE BUILDING ENVELOPE

Source, Effect and Distribution of Indoor Particulate Matter

Further Study on Permeability of Outdoor Particles in Temperature Difference into Indoor Air

A methodology for predicting particle penetration factor through cracks of windows and doors for actual engineering application

Inhalation Exposure To Particulate Matter In Rooms With Underfloor Air Distribution

Experiment and numerical investigation of inhalable particles and indoor environment with ventilation system