Abstract:In recent years, with the prohibition of CFC by international community, the cascade refrigeration cycle is showing the development of new features, in which Auto-cascade refrigeration cycle with its simple structure, reliable performance particularly has aroused widespread concern. This paper puts forward using the distillation column instead of the multi-stage segregation device, which make full use of the distillation column to provide good enough conditions for the vapour-liquid contact,creat a greater contact surface, ensure the space and time of heat and mass transfer between each component of refrigerant and lubricant, in order to achieve high efficient separation.This cycle uses environment-friendly non-azeotropic mixed (NARM) R600a\R23\R50 as refrigerant. The improved PT equation is used, according to the quality and energy conservation of the distillation column and heat exchanger to carry on thermodynamic analysis. On this basis, the selection and the calculation of the experimental apparatus and equipment carried out to self-made a auto-cascade refrigeration cycle prototype. Through the cooling test of the eight different mixture ratio, the best quality ratio is found and the minimum temperature the ratio can reach. Through repeated experiments, study that the cycle compression ratio of one component affect on the temperature inside the ultra-low temperature box, the cycle compression ratio of the different components under the same temperature inside the ultra-low temperature box affect on the system performance, and the three throttle, cold boxes cycle high and low pressure ratio and distillation column reflux liquid extraction rate affect on the system performance. The prototype broke the traditional method that access to the depth refrigeration needs multiple refrigeration compressors, only use a single-stage air-conditioning refrigeration compressor with lubrication, to achieve high and low boiling point component through the use of distillation devices, including high-performance lubricant separation, successfully reduced to below -80 degrees C, and system stability. According to the results of a series of experiments, analyzed the ratio of working fluid, cycle pressure ratio, distillation column extraction rate of liquid return, increase heat and the expenditure component's effect on the temperature in the ultra-low temperature box and the COP of system.

Experimental Study on the Performance of Small-sized Cool Storage Air Conditioning with Phase Change Materials

Numerical investigations on the performance of a single-stage auto-cascade refrigerator operating with two vapor-liquid separators and environmentally benign binary refrigerants

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

Theoretical Investigation on the Performance of a Modified Refrigeration Cycle Using Binary Zeotropic Hydrocarbon Mixture R170/R290

Performance evaluation on an internal auto-cascade refrigeration cycle with mixture refrigerant R290/R600a

Development of inorganic phase change material and cold charging performance analysis based on cold storage refrigerator

Performance Study of Phase Change Charging/discharging Processes of Condensing Heat Storage in Cold Regions Based on a Mathematical Model

Simulation Study on Performance of an Air Source Heat Pump System Combined with Phase Change Thermal Storage Using Alternative Refrigerants

Performance characteristics of direct contact refrigeration system based on phase change materials and different refrigerants

Performance of a Single-Stage Auto-Cascade Refrigerator Operating with a Rectifying Column at the Temperature Level of −60 °C

Experimental and Theoretical Assessments on the Systematic Performance of a Single-Stage Air-Source Heat Pump Using Ternary Mixture in Cold Regions

A Study On A New Auto-Cascade Refrigerating Cycle

Experimental Measurement on Characteristics of Cool Storage Air Conditioning System

Performance Study on a Low-Temperature Absorption–compression Cascade Refrigeration System Driven by Low-Grade Heat

Investigations on Performance of an Auto-Cascade Absorption Refrigeration System Operating with Mixed Refrigerants

Experimental assessment of using phase change materials in vapor compression refrigeration systems for condenser pre-cooling

Experimental study on cool storage air-conditioning system with spherical capsules packed bed

Experimental performance study of a small wall room air conditioner retrofitted with R290 and R1270

Experimental and Theoretical Study on the Cooling Performance of a CO2 Mobile Air Conditioning System

Study on Performance of Small Cool Storage Air Conditioning System

Enhancing the Air Conditioning Unit Performance via Energy Storage of Different Inorganic Phase Change Materials with Hybrid Nanoparticles