Abstract:The incorporation of supplementary cementitious materials (SCMs) in concrete can improve the properties of concrete partially immersed in salt solution. However, the current partial immersion environment only considers the capillary action above the still water level, does not consider the capillary action above the fluctuating water level in dry-wet cycling environment. In this paper, a series of indoor exposure experiments were carried out to investigate the effects of incorporating polynary SCMs including fly ash (FA), ground granulated blast furnace slag (GGBFS) and silica fume (SF) on the sulfate resistance and chloride impermeability of concrete considering the capillary action above the fluctuating water level in dry-wet cycling environment. A total of 15 groups of concrete with different mix proportions (total 150 concrete specimens) were designed to study the effects of different replacement levels of polynary SCMs on concrete properties. The effects of incorporating polynary SCMs on the chloride impermeability of concrete above and in the fluctuating water level zone were investigated. The scanning electron microscope (SEM), x-ray diffraction (XRD) and mercury intrusion porosimetry (MIP) tests were used to analyze the microstructure of concrete. The results indicate that when concrete is incorporated with polynary SCMs and subjected to capillary action above the fluctuating water level, the compressive strength and chloride impermeability first increase and then decrease with the increase of FA content; the compressive strength and chloride impermeability decrease with the increase of GGBFS content; the compressive strength first increase and then decrease with the increase of SF content, and the chloride impermeability increase with that. The transport process of chloride in concrete above the fluctuating water level zone includes the longitudinal transport under capillary action and the transverse transport under concentration gradient action. The combined effects of both cause the higher chloride concentration in concrete above the fluctuating water level zone. Comprehensively considering the influence of different mix proportions on the sulfate resistance and chloride impermeability of concrete, it is determined that 20% FA + 5% SF is the optimal replacement level with the excellent performance considering the capillary action above the fluctuating water level in dry-wet cycling environment.

Effects of Permeable Surface Treatment Technology on Concrete Performance

Performance of Silane -Based Surface Treatments for Protecting Degraded Historic Concrete

Chloride Penetration in Surface-Treated Concrete in Natural and Accelerated Environments

Comparison of Chloride Penetration into Surface-Treated Concrete in Artificial and Natural Environments

Influence of silane treatment on the freeze-thaw resistance of concrete

The Research of Influence on the Freezing Resistance and the Permeation Resistance of Concrete with Spraying Silane

Evaluation of the Performance of Surface Treatments on Concrete Durability

Effect of Isobutyl-Triethoxy-silane Penetrative Protective Agent on the Carbonation Resistance of Concrete

Influence of Silane-based Impregnation Agent on the Permeability of Concretes

Effect of Lithium Silicate Composite Sol on the Properties of Concrete Surface

Study On The Concrete Cracks Repaired By The Permeant Adhesive

Effects of incorporating polynary SCMs on sulfate resistance and chloride impermeability of concrete considering capillary action in dry-wet cycling environment

Effects of controlled permeability formwork on surface properties and early age shrinkage of concrete

Design and Evaluation of an Innovative Composite Silicate-Based Surface Treatment Agent of Concrete

Effect of Modified Tetraethyl Orthosilicate Surface Treatment Agents on the Permeability of Airport Pavement Concrete

Experimental and Numerical Study on the Microstructure and Chloride Ion Transport Behavior of Concrete-to-concrete Interface

Development of cementitious capillary crystalline waterproofing agents and durability study of concrete in the presence of chloride with sulfate in aqueous environment

Improved hydrophobic property of pavement and bridge concrete with silane coating

Application of silane to improve durability of concretes with different age and moisture content

Effect of CO2 Surface Treatment on Penetrability and Microstructure of Cement-Fly Ash–slag Ternary Concrete

Preparation and performance of steel slag and recycled brick aggregate modified concrete under the background of solid waste application