Abstract:In the face of the problem of waste disposal in the demolition of concrete structures, a composite wall composed of recycled concrete bricks and fly ash blocks was proposed, and based on the previous thermal performance research, its axial compression performance were further studied. Four types of walls were designed and constructed: (1) clay brick masonry (CBM), (2) recycled concrete brick masonry (RBM), (3) bilateral clay bricks masonry with coal-ash blocks sandwich insulation wall (CFCM), and (4) bilateral recycled concrete bricks masonry with coal-ash blocks sandwich insulation wall (RFRM). The test results showed that recycled concrete brick masonry exhibited a higher bearing capacity than clay brick masonry. The ultimate load of RBM was 15% higher than that of CBM. Moreover, the ultimate load of CFCM was 21% higher than that of CBM. Following the addition of sandwich coal-ash blocks in RBM, its ultimate load increased by over 42% than that of CBM. Following the addition of coal-ash blocks sandwich in both clay and recycled concrete bricks masonry, both the bearing capacity and strain exhibited improvement, the yielding load and compressive strength of them increased. Thus, it could be concluded that coal-ash blocks improved its bearing capacity. Based on the analysis of the axial compression tests, a theoretical computational model was developed and a computational expression to explain the compressive bearing capacity of a two-sided brick with coal-ash blocks sandwich insulation wall. Comparisons between the test ultimate loads (FT) and the estimated ultimate loads (FE) confirmed the accuracy of the theoretical calculation model for the compressive bearing capacity. Thus, theoretical computational models are highly recommended for the design of two-sided bricks with insulating walls constructed from coal-ash blocks being sandwiched together. This study provides a theoretical basis for the engineering application of recycled concrete brick wall and fly ash block composite wall.

EXPERIMENTAL RESEARCH ON THE COMPRESSION PERFORMANCE OF RECYCLED CONCRETE SELF-INSULATION LOAD-BEARING BLOCK MASONRY

Behavior of FRP-Confined Recycled Brick Aggregate Concrete under Monotonic Compression

Shear Performance Investigation of Recycled Concrete Load-Bearing Blocks for Sustainable Masonry

Compressive Performance of Concrete Hollow Block Masonry with Recycled Aggregates

EXPERIMENTAL STUDY ON BASIC MECHANICAL BEHAVIOR OF A NEW TYPE CONCRETE HORIZONTAL-HOLE HOLLOW BLOCK MASONRY

Mechanical Properties of a New Type Recycled Aggregate Concrete Interlocking Hollow Block Masonry

Experimental Study on Basic Mechanical Properties of Core-Column Non-mortar Aerated Concrete Block Masonry

Experimental study on compressive behavior of green chain block masonry

Experimental Studies on the Behaviors of New Energy-Saving Concrete Self-Insulating Load-Bearing Block Wall under Low-Cycle Cyclic Loading

EXPERIMENTAL RESEARCH ON SEISMIC BEHAVIOR OF LOAD-BEARING WALL WITH COMPOUND INSULATION CONCRETE BLOCKS

Research on the Compression Behavior of a New Type of Concrete Horizontal-hole Hollow Block Masonry

A comparative analysis of compression bearing capacity in recycled concrete brick walls and composite walls incorporating coal-ash blocks

Experimental Studies on Bearing Capacity of Reinforced Block Short-Leg Masonry Shear Wall under Eccentric Compression

Experimental Study on the Behavior of Confined Grouted Concrete Block Masonry under Axial Compression

Experimental Study on Behavior of Bricklaying Strengthening Ribs Composite Wall under Low Cyclic Reversed Loading

Stress–strain Model for Hollow Concrete Block Masonry under Uniaxial Compression

RESEARCH ON THE SEISMIC BEHAVIOR OF THE REINFORCED BLOCK SHORT-LEG MASONRY SHEAR WALL

Research on reinforced block short-leg masonry shear wall

Structural Performance and Design Investigation on Recycled Concrete Block Masonry During Post-earthquake Reconstruction

Test on Seismic Behavior of Recycled Concrete Block Walls