Abstract:Implemented in the frequent extreme rainstorms, aggravation of non-point source pollution, and complex drainage system of urban built-up area, sponge facility practices often intertwine with a very large number of hydro-environmental and socio-economic considerations and constraints. Due to the lack of basic and measured data, fragmented engineering design, more systematic and strategic approaches to address this multi-scale, and multi-parameter problem of practice allocation should be planned and optimized. In this study, a practical quantitative calculation method of stormwater regulation capacity in urban built-up areas is proposed. The details are as follows: the sub-catchment areas are divided by using the drainage pipe section editing function of Auto CAD and the regional analysis function of ArcGIS, and the stormwater regulation capacity in study area to be reconstructed is divided into four grades to define the water-sensitive areas according to the comprehensive runoff coefficient (α), which were excellent (α < 0.6), good (0.6 ≤ α < 0.7), medium (0.7 ≤ α < 0.8), and poor (α ≥ 0.8). The stormwater regulation capacity of green spaces is determined by empirical model calculation and soil moisture hydrograph field measurement. The measured soil saturated hydraulic conductivity in the study area was about 110 mm/h. The drainage capacity of the pipe networks was determined by the length of the overloaded pipe section. Under the conditions of 10a and 50a rainfall return period and 3-h rainfall duration simulated by SWMM, the length of the overloaded pipe section accounts for 33.0% and 40.8% of the total, respectively. Based on the identification of water-sensitive areas in urban high-density built-up areas, the quantitative calculation method of stormwater runoff regulation capacity was constructed through the calculation of the coupling coordination degree of "source-midway-terminal" infrastructures and the layout of storage tanks in the overloaded pipe section. These can estimate the current situation of stormwater regulation capacity of different sizes in urban built-up areas and formulate the optimized planning scheme of sponge reconstruction projects.

Reconstruction Design of Rainwater Pipe Network in Old Urban District Based on Drainage Load of Pipeline

Analysis of a Rainwater Harvesting System for Domestic Water Supply in Zhoushan, China

Exploring Hydraulic Impacts of Downstream Water Levels on the Drainage Capacity of a Stormwater Pipe

Application of InfoWorks ICM in Problem Diagnosis and Reconstruction of Drainage Pipe Network for Urban Build-up Area

Assessment of the service performance of drainage system and transformation of pipeline network based on urban combined sewer system model

Zoning Based Cascade Infrastructure System Design for Urban Waterlogging Prevention

Analysis of Drainage Capacity of Urban Conduits Based on SWMM

Selection of Water Transmission Method and Analysis of Pipe Network Zoning in Municipal Water Supply and Drainage Design

Study on Planning and Design of Blue-Green-Gray Transformation of Lakeside Cities to Deal with the Complex Urban Waterlogging Caused by Extreme Rainstorm

Simulation of Urban Rainstorm Waterlogging and Pipeline Network Drainage Process Based on SWMM

Urban stormwater forecasting model and drainage optimization based on water environmental capacity

Quantitative calculation of stormwater regulation capacity and collaborative configuration of sponge facilities in urban high-density built-up areas

A Structural Optimization of Urban Drainage Systems: An Optimization Approach for Mitigating Urban Floods

Urban Flood Modelling and Optimization Strategy of Plain Polder Area Under Heavy Precipitation Scenario:A Case Study on Dian Shanhu Town,Kunshan City

Network Structure Optimization Method for Urban Drainage Systems Considering Pipeline Redundancies

Experimental study of rainwater grate blocking and submergence of outfall on drainage network capacity

Automatic Setting of Urban Drainage Pipe Monitoring Points Based on Scenario Simulation and Fuzzy Clustering

Water quality and quantity changes in drainage pipes in old residential areas of Shenzhen

Hydraulic Model for Multi-Sources Reclaimed Water Pipe Network Based on EPANET and Its Applications in Beijing, China

Urban rainstorm and waterlogging scenario simulation based on SWMM under changing environment

Studies on resource utilization of storm water in Huairou District and planning management of urban storm drainage