Synergistical reduction of PM and NO formation in preheating co-firing of coal and biomass
Ying Yu,Liang Xu,Guangqing Zhu,Yi Liu,Yanqing Niu
DOI: https://doi.org/10.1016/j.jclepro.2023.138918
IF: 11.1
2023-09-22
Journal of Cleaner Production
Abstract:Preheating co-firing of coal and biomass was proposed for synergetic mitigation of pollutant source emissions. The effects of different operating parameters on particle matter (PM) and nitric oxide (NO) emissions were investigated, including excess air ratio ( α p ), temperature ( T p ), residence time ( t p ) in the preheating zone and temperature ( T c ) in the combusting zone. Coal and biomass particles were fed separately by two feeders, mixed uniformly in a mixing device and then inserted in a high-temperature drop-tube furnace. PM and NO emissions at the furnace outlet were measured by ELPI+ and the infrared gas analyzer. The results showed that as α p increased from 0 to 0.5, PM 10 emission declined by 10.65% while NO emission went down first and then rose up with a turning point at α p = 0.3 of 247.93 mg/m 3 . When T p increased from 1400 K to 1800 K, PM 10 emission increased but NO emission decreased. The increase in the former was more than twice the decrease in the latter. More interestingly, the forming mechanism of ultrafine mode PM 0.3 was dominated by "solid-vapor" process at low combusting temperature but transformed into "vapor-particle" process at high temperature. When T c ascended from 1700 K to 1800K, the dominant "vapor-particle" process was inhibited, leading to a decrease of 13.5% in PM 0.3 emission. PM 0.3-2.5 , PM 2.5-10 and NO emissions were boosted by 64.99%, 36.40% and 78.20% respectively with T c ascending from 1400 K to 1800 K. As t p rose from 0.1 to 0.5, the production of PM 0.3 and NO decreased by 29.50% and 44.55% respectively, but that of PM 0.3-2.5 and PM 2.5-10 increased by 20.04% and 33.83% continuously. Under optimum parameters ( T p = 1300 K, α p = 0.3, T c = 1400 K and t p = 0.5 s), PM 10 and NO emissions could be reduced by 30.88% and 48.01%, respectively.
environmental sciences,green & sustainable science & technology,engineering, environmental