Abstract:To investigate the impact of different capping materials on the phosphorus release from lake sediment,indoor simulation experiments were conducted.Phosphorus release mechanisms from Erhai lake sediment capped by ferric oxide,aluminium oxide,manganese oxides and lake sand,vermiculite were studied.Results showed that:(1) phosphorus release from the sediment was inhibited under all treatment procedures.Sediment TP Q max under Fe,Mn,A1,lake sand and vermiculite treatment was reduced by 40.36％,32.07％,26.25％,11.62％ and-7.83％ respectively.(2)Cover material mainly reduced the NH4 C1-P,BD-P,NaOH-P content,and the decline by the metal oxides was larger than lake sand and vermiculite,Fe oxides reduction is the largest,followed by the Mn oxides.(3)Cover material affected the sediment phosphorus release by changing Fe,A1,Mn and TOC content in different phosphorus forms.Sediment BD-Fe and HC1-Fe content increased by 23.81％ and 110.76％ respectively in Fe group,and in Mn group sediment NH4C1-Mn content increased by 110.76％.Sediment NaOH-Al under each treatment was all transformed into HC1-A1.And sediment TOC content decreased correspondingly,further increasing the sediment w (TTOC/TP),w (TFe/TP),w (TMn/TP),w (TAl/TP) ratios.This helped promote the transformation of labile phosphorus into inert phosphorus.(4) Sediment pH and Eh were changed after capping with different materials which influenced metal speciation and then controlled sediment phosphorus release.Overall,metal oxide showed higher phosphorus immobilization efficiency than other inorganic non-metallic materials,metal oxides can not adsorb phosphorus,but also induce phosphorus transformation through metal iron binding,which control the sediment phosphorus release,and the Fe oxides demonstrated the best efficiency.

Impact of different capping materials on the phosphorus release from lake sediment