Abstract:Volatile organic compounds (VOCs) are one of the major components of air pollution. Catalytic combustion is a promising technology for the treatment of VOCs and at its center is the preparation of efficient and cheap catalysts. In this study, by loading copper (Cu) and manganese (Mn) on Santa Barbara Amorphous-15 (SBA-15) molecular sieve, the Cu x –Mn y /SBA-15 ( x = 1, 2; y = 1, 2) composite metal oxide catalyst was prepared using the equal volume impregnation method. Their performance in the toluene catalytic combustion reaction was investigated by adjusting the molar ratio ( x : y ), and the loading of Cu and Mn. The results of the Brunner–Emmett–Teller (BET), X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) analyses show that the CuMnO spinel phase can be detected in the Cu–Mn composite metal oxide catalyst doped with a low concentration of Cu. The overall rod-like structure of the fibrous network structure provides a large specific surface area, and the particle crystallinity is low and the dispersion is good. Due to the synergistic effect of Cu and Mn, the greater the amount of Mn 3+ and adsorbed oxygen species (O ads ) that are available, and the higher the turnover frequency (TOF) value, the better and more superior catalytic performance and excellent stability is obtained, when compared with the single-component oxides used in toluene catalytic combustion. After a continuous catalytic reaction for 12 h, the toluene conversion rate remained above 95%. The coupling effect of the catalytic reaction temperature and concentration of oxygen on the catalytic combustion of toluene was also studied. At a low reaction temperature (<250 °C), the increase of the concentration of oxygen played a superior role in promoting the conversion of toluene. The kinetic analysis of the toluene catalytic combustion process showed that the catalytic combustion of toluene by Cu–Mn/SBA-15 followed both the Mars–Van Krevelen (MVK) and Langmuir–Hinshelwood (L–H) reaction mechanisms. With the increase of the O ads amount caused by the decrease of the Cu ratio, the proportion of the L–H reaction mechanism increases.

Effect of doping methods of Cu-OMS-2 on catalytic oxidation of toluene

Highly Catalytic Performance for the Selective C-H Bond Oxidation of P-Chlorotoluene over Co, Cr Co-Doped OMS-2 Catalyst

Catalytic Ozonation of Toluene over Spinel Cumn2o4: Influencing Factors, Reaction Mechanism and Pathways

Investigation of Cu-Mn Catalytic Ozonation of Toluene: Crystal Phase, Intermediates and Mechanism

Effect of ambient factors over spinel CuMn2O4 for toluene catalytic ozonation: Enhancement of the synergy and the generation of ROS

Catalytic Oxidation of Toluene over Co-modified Manganese Oxide Octahedral Molecular Sieves (OMS-2) Synthesized by Different Methods

Deactivation Mechanism of CeO2-Based Mixed Oxide Catalysts Supported on SiO2

Coupling effect of reaction conditions on the catalytic activity of Cu–Mn composite oxide catalysts for toluene

Low-Temperature Combustion of Toluene over Cu-Doped SmMn<sub>2</sub>O<sub>5</sub> Mullite Catalysts via Creating Highly Active Cu<SUP>2+</SUP>-O-Mn<SUP>4+</SUP> Sites

Highly catalytic-performance for benzene oxidation: Effect of oxygen species on OMS-2 by Co doping

Bimetal oxide CuO/Co3O4 derived from Cu ions partly-substituted framework of ZIF-67 for toluene catalytic oxidation

Catalytic Combustion of Toluene over Highly Dispersed Cu-CeOx Derived from Cu-Ce-MOF by EDTA Grafting Method

Controllable Synthesis of Pd/CuxCo3-xOn Interfaces for Highly Efficient Catalytic Combustion of Toluene

Insight into the catalytic performance and reaction routes for toluene total oxidation over facilely prepared Mn-Cu bimetallic oxide catalysts

Clarify the effect of different metals doping on α-MnO 2 for toluene adsorption and deep oxidation

Boosting the total oxidation of toluene by regulating the reactivity of lattice oxygen species and the concentration of surface adsorbed oxygen

Promotional effect of cobalt doping on catalytic performance of cryptomelane-type manganese oxide in toluene oxidation

Surface In Situ Doping Modification over Mn 2 O 3 for Toluene and Propene Catalytic Oxidation: The Effect of Isolated Cu δ+ Insertion into the Mezzanine of Surface MnO 2 Cladding

Cu-Mn-Ce ternary mixed-oxide catalysts for catalytic combustion of toluene

Enhancing CO catalytic oxidation performance over Cu-doping manganese oxide octahedral molecular sieves catalyst

Impact of Cu Content on the Activity of TiO2-based Catalysts for Toluene Oxidation