Abstract:The removal of tetracycline antibiotics using adsorbents is becoming an environmentally friendly and cost-effective method. This study systematically analyzed the stability, structure, morphology, and chemical properties of various adsorbents. Batch adsorption experiments (pH, time, temperature, tetracycline concentration, and adsorbent dosage) were conducted to compare the adsorption capacity of the six adsorbents (biochar, activated carbon, montmorillonite, zeolite, chitosan, and polymerized aluminum chloride) for tetracycline removal. The results indicated that montmorillonite had the highest adsorption efficiency, followed by biochar, with chitosan showing the lowest efficiency. At an adsorbent dose of 25 g/L and an initial tetracycline concentration of 120 mg/L, the removal rates of tetracycline by montmorillonite, biochar, and chitosan were 97.6%, 69.3%, and 12.2%, respectively. Furthermore, the removal rate of tetracycline by biochar, following the response surface methodology optimal mode, increased by 5.5%. The Elovich model was better suited to explain the adsorption process of tetracycline compared to the conventional pseudo-first kinetic model and second-order kinetic model. The isothermal adsorption model suggested that both chemisorption and physisorption occurred in all removal processes, in which chemisorption dominated. Tetracycline was efficiently adsorbed through the combined effects of pore filling, electrostatic attraction, π-π interactions, and complexation reactions of surface functional groups. Additionally, montmorillonite demonstrated superior performance as an adsorbent for tetracycline removal from swine wastewater compared to the other adsorbents studied.

Study on Adsorption of Residual Tetracycline in Pharmaceutical Wastewater Using Modified Montmorillonite

Tetracycline Removal from Water by Adsorption on Geomaterial, Activated Carbon and Clay Adsorbents

An innovative and sustainable approach for water purification: Thermal decomposition of tetracycline contaminant adsorbed on thermally stable montmorillonite

Evaluation and optimization of six adsorbents for removal of tetracycline from swine wastewater: Experiments and response surface analysis

Dually organic modified bentonite with enhanced adsorption and desorption of tetracycline and ciprofloxacine

Adsorption of tetracycline antibiotics by nitrilotriacetic acid modified magnetic chitosan-based microspheres from aqueous solutions

Tetracycline decontamination from aqueous media using nanocomposite adsorbent based on starch-containing magnetic montmorillonite modified by ZIF-67

Effective microwave regeneration of natural sepiolite and montmorillonite as adsorbents for tetracycline removal and mechanism insight

Adsorption Performance and Mechanisms of Tetracycline on Clay Minerals in Estuaries and Nearby Coastal Areas

Pharmaceuticals Removal by Adsorption with Montmorillonite Nanoclay

Coupling humic acid in Fe-bearing montmorillonite for enhanced adsorption and catalytic degradation of tetracycline

A Novel Magnetization-Modified Attapulgite as an Excellent Adsorbent for Tetracycline in Water

Study on mechanism of removal of sudden Tetracycline by compound modified biological sand filtration process

An effective strategy for removing tetracycline from water: Enhanced adsorption reliability and capacity by tyrosine modified layered hydroxides

Adsorption and Cosorption of Tetracycline and Copper(ii) on Montmorillonite As Affected by Solution Ph.

Promoted photocatalytic degradation of tetracycline hydrochloride by montmorillonite catalyst loaded with Cu/Mn

Preparation of Chitosan-Modified Bentonite and Its Adsorption Performance on Tetracycline

Studies on the removal of tetracycline by multi-walled carbon nanotubes

Efficient Adsorbent Derived from Phytolith-Rich Ore for Removal of Tetracycline in Wastewater

The Promotion of Medical Products in the 21st Century: Off-label Marketing and First Amendment Concerns.

Adsorption of antibiotics on montmorillonite and site energy distribution analysis