Waste to wealth: Facile activation of red mud waste and insights into industrial reactive dye removal from wastewater
Vijay Kumar Singh,Ayantika Sett,Sankha Karmakar
DOI: https://doi.org/10.1016/j.cej.2023.148373
IF: 15.1
2024-02-01
Chemical Engineering Journal
Abstract:Reactive dyes, widely applied in the textile industry for their vibrant colors, excellent fastness, and ease of application. Their presence poses multifaceted threats to aquatic ecosystems and health risks, including skin irritation, allergic reactions, respiratory problems, and increased cancer risk. In response to these challenges, this study explores the potential of acid-activated red mud, an industrial solid waste by-product from the aluminum industry, as an economical adsorbent for the removal of commercial reactive dyes from industrial wastewater. The robustness of the employed Box-Behnken design is evidenced by the high determination coefficient (0.997) and correlation coefficient (0.994) values. The optimum acid activation condition was determined to be 385 K activation temperature, 91 min activation time, and 2.5 N HCl acid concentration, resulting in a 99.24 ± 0.04 % removal efficiency for reactive dyes. Analysis of X-ray Diffraction and X-ray Fluorescence data revealed that the activation process significantly increased the composition of Al and Fe compounds. This enhancement was achieved by eliminating compounds that block active sites and improves the overall surface area from 37.35 m2/g to 173.81 m2/g. Detailed morphological analysis, conducted through high-resolution transmission electron microscopy and scanning electron microscopy, reveals profound transformation in the surface structure. The study primarily focuses on removing four commercial reactive dyes: Reactive Blue 2 (RBL-2), Reactive Black 5 (RBK-5), Reactive Red 24 (RR-24), and Reactive Yellow 15 (RY-15). These dyes demonstrate maximum adsorption capacities of 118.24 mg/g, 121.02 mg/g, 129.19 mg/g, and 142.64 mg/g, respectively. In order to comprehend the interactions between dye molecules and the adsorbent, a first principle based model was employed to simulate the adsorption kinetics.
engineering, chemical, environmental