Study on the adsorption property of Pb (Ⅱ) in the waste vegetable-based bio-charcoal

Jun-min ZHU,Zhao-wei WANG,Jun-hong GAO,Chao-ran XIE,Han-yu ZHANG,Xiao-yun XIE,Cheng JIN

DOI: https://doi.org/10.13637/j.issn.1009-6094.2017.01.045

2017-01-01

Abstract:This paper takes it as its research objective to study the biochar in adsorbing lead (Pb(Ⅱ)) in the aqueous solution,and in turn to explore its adsorptive features.In order to study the adsorptive features of biochar,we have done a lot of experiments.First of all,we have chosen biochar from the waste-celery (Apium graveolens L.) as a raw material for preparing the adsorption agent via the pyrolyzation at a temperature of 500 ℃ in a condition with the limited amount of oxygen.And,secondly,the physicochemical properties of biochar can be characterized by using a SEM,EDS,CHN elemental analyzer to analyze its FTIR surface area and pore size.Thirdly,we have examined the effects of the dosage,the initial concentration,the pH value,the time length and the temperature adopted on the Pb(Ⅱ)-removing process and removing rate in our experiments,in addition to the analysis of the adsorption isotherm and adsorption kinetics regularity.The results of the said experiments indicate that the biochar of the discarded celery has left fewer pores after the experiment and a much smaller surface area though still functioning well.What is more,it can be found that,the adsorption efficiency can be made so high as 240.5 mg/g on the condition when the initial pH remains 5 at the dosage of 0.8 g/L with the initial concentration being 400 mg/L.Furthermore,the adsorption capacity and the removal efficiency curves also indicate that the biochar adsorption of Pb (Ⅱ) functions most efficiently in the dosage range between 0.5-1 g/L at the optimal initial concentration of 200 mg/L.We have made it also clear that the adsorption capability of the heavy metal contaminants tends.to be dependent on some reaction factors,particularly that of pH.The absorption of the lead-affected pH value by the waste-celery biochar has been verified by our sequentially designed batch experiments.It has been made clear that the Pb(Ⅱ) adsorbed by the biochar tends to increase with the increase of the pH value from 1.49 to 5.33.Kinetic analysis we have done also shows that the Pb(Ⅱ) adsorbed by the waste-celery biochar can be as efficient as seen in 5 min.Furthermore,the adsorption process tends to be more in line with the identifiable pseudo-second kinetic coefficient of 0.99 and even more,with the actual equilibrium adsorption efficiency being close to that of the theoretical equilibrium.Meanwhile,the adsorption rate proves to be able to be controlled by the chemical reaction rate.Besides,the isotherm analysis demonstrates that the waste-celery biochar Pb (Ⅱ) adsorption process can be controlled via the Langmuir isotherm model and the Freundlich models within the experimental concentration range,in which both of the coefficients of identification and determination can be made so high as to 0.94.Therefore,the waste-celery biochar can be taken as an excellent adsorbent substance.