Abstract:A broadband noise source model based on Lighthill’s acoustic theory was used to perform numerical simulations of the aerodynamic noise sources for a high-speed train. The near-field unsteady flow around a high-speed train was analysed based on a delayed detached-eddy simulation (DDES) using the finite volume method with high-order difference schemes. The far-field aerodynamic noise from a high-speed train was predicted using a computational fluid dynamics (CFD)/Ffowcs Williams-Hawkings (FW-H) acoustic analogy. An analysis of noise reduction methods based on the main noise sources was performed. An aerodynamic noise model for a full-scale high-speed train, including three coaches with six bogies, two inter-coach spacings, two windscreen wipers, and two pantographs, was established. Several low-noise design improvements for the high-speed train were identified, based primarily on the main noise sources; these improvements included the choice of the knuckle-downstream or knuckle-upstream pantograph orientation as well as different pantograph fairing structures, pantograph fairing installation positions, pantograph lifting configurations, inter-coach spacings, and bogie skirt boards. Based on the analysis, we designed a low-noise structure for a full-scale high-speed train with an average sound pressure level (SPL) 3.2 dB(A) lower than that of the original train. Thus, the noise reduction design goal was achieved. In addition, the accuracy of the aerodynamic noise calculation method was demonstrated via experimental wind tunnel tests.

Engineering Study of the Noise Control of the Semi-Closed Locomotive Loading Test System in Hami Depot

Study on the Noise Control of the Wheel Loader

A Research on the Noise Source Identification and Noise Control of Heavy-duty Truck

Experimental Analysis and Control to the Rear Interior Noise of the Fuel Cell Vehicle

Study on the Identification of Noise Sources and Reducing Noise for Diesel Engine

Noise Measurement, Analysis and Denoise of Diesel Engine Testing Chamber Based on Sound Pressure Principle

Research on Simulation Platform Architecture for Noise Reduction of Electric Locomotive Wheel

Research on the Technology of the Wheel-rail Noise Reduction after Train Speed Increase

Research on vibration isolation and noise reduction technology for the metro depot

Experiment Analysis on Noise of the Minibus Exhaust Muffler

Assessment of ventilation noise impact from metro depot with over-track platform structure on workers and nearby inhabitants

Design and Application of Heavy-duty Vehicle Powertrain Noise Enclosures

Testing study of aerodynamic noise for high speed train model in aero-acoustic wind tunnel

An Integrated Passive and Active Control System for Reducing Haul Truck Noise

Analysis and Control of Light-Duty Truck Exterior Noise

Research on Train Wheel-Rail Noise and the Control Measures

Test and Analysis of Pass by Noise Source on a Heavy-duty Vehicle

Test and Improvement of Ventilation Cooling System for High-Speed Train

Internal Noise Reduction in Railway Carriages: A Case Study in China

Research on Aerodynamic Noise Reduction for High-Speed Trains

Experimental Investigation on Noise Radiation Characteristics of an Urban Transit Train at Moderate and Low Speeds