Abstract:Due to the intricate composition and recalcitrant nature of coking wastewater, the biochemical effluent often fails to meet standards. This study explored the preparation of particle electrodes, utilizing activated carbon powder (PAC) loading single-element Fe, Co, and Ni, as well as dual-element Ni–Fe and Co–Fe as catalyst. The particle electrode system was integrated with persulphate (PS) activation to enhance its performance. The effects of potassium persulphate (KPS) dosages, currents, and Ni:Fe ratios were investigated. The results showed that bimetallic particle electrodes outperformed their monometallic particle electrodes. Among the five electrode materials, Ni–Fe/PAC achieved the best degradation efficiency of 84.4% and the lowest energy consumption of 19.73 kW·h·kg −1 COD. When the initial concentrations of TOC and COD were set at 300 and 280 mg L −1 , the Ni–Fe/PAC with 5 mmol L −1 KPS achieved removal efficiencies of 61.7 and 84.4%, respectively. The metals on Ni/PAC and Co/PAC existed in the zero-valent state, while Fe on Fe/PAC was present as Fe 2 O 3 . Co–Fe/PAC exhibited the formation of CoFe 2 O 4 oxides. Ni–Fe/PAC possessed the lowest hydrogen evolution reaction potential (−0.28 V), and the highest oxygen evolution potential (2.4 V), and reached an electrochemical active surface area (ECSA) of 236.3 cm 2 . Cyclic voltammetry (CV) curves indicated that the direct redox reactions and indirect oxidation of pollutants occurred concurrently. Both •OH and ⋅SO4− radicals played crucial roles during the degradation processes. The degradation efficiency of organic matter was as follows: benzene compounds (88.4%) >heterocyclic compounds (75.3%) >polycyclic aromatic hydrocarbons (53.9%).

Study of Degradation of Coking Wastewater by Electrochemical Method

Electrochemical Oxidation of Chemi-Thermo-mechanical Pulping Wastewater

The study on Chemi-thermomechanical pulp wastewater treatment using electro-fenton process

Electrocatalysis degradation of biochemical tail water from coking wastewater using particle electrode with persulphate

Experimental study of advanced treatment of coking wastewater using TiO2 photocatalytic oxidation

ELECTROCATALYTIC OXIDATION OF ORGANIC POLLUTANTS IN ELECTROPLATING WASTEWATER IN PILOT SCALE

Experimental study of photoelectrocatalytic degradation of phenol-containing wastewater on immobilized TiO2

Transforming coking wastewater: Breakthrough COD reduction with Ti/RuO 2 -IrO 2 anode electrocatalysis

Corrosion Study of Fe-C Porous Materials in Coking Wastewater

Enhanced treatment of p-nitrophenol and coking wastewater through electrochemical and electrochemical-ozonation coupling process utilizing a novel Ti4O7 reactive electrochemical membrane anode

Study on advanced treatment of coking wastewater by iron-carbon micro-electrolysis process

Enhanced coking wastewater advanced treatment by using particle electrodes excited persulfate in the three-dimensional electrocatalytic reactors

Study on Coking Wastewater Treatment by Fixed Bed of Metallization Pellets with High Carbon

Pretreatment of Coking Wastewater by Bimetal Micro-Electrolysis

Treatment of Coking Wastewater by an Advanced Fenton Oxidation Process Using Iron Powder and Hydrogen Peroxide

Studies on the TiO2/ZSM-5mphotocatalyst and Combination with Persulfate for the Degradation of Coking Wastewater

Research on Phenol Wastewater Treatment by Electrochemical Oxidation

STUDY ON PHOTO-DEGRADATION OF ORGANIC CONTAMINANTS IN COKING WASTEWATER CATALYZED BY TiO2/Fe3O4 COMPOSITE PARTICLES

Study on Advanced Treatment of Coking Wastewater by Fenton Oxidation Process

Efficient advanced treatment of coking wastewater using O3/H2O2/Fe-shavings process

Dissolved organic matter (DOM) removal from coking wastewater with efficient vanadium-titanium magnetite particle electrodes by 3D/EC/KPS system: Optimization, performance, and mechanism