Abstract:When the lander approaches the lunar surface, the rocket exhaust will erode the surface and eject massive high-speed dust, which could damage the payloads on the lander or interfere with subsequent surface operations. This process also provides a unique opportunity to study the plume-dust interaction and the wind erosion on the surface of airless body such as the Moon. Previously, limited knowledge was obtained from Apollo landing images and a simplified erosion model is built to study the erosion process. With high-quality data acquired in the landing process of Chang'E-4 (CE-4) mission, for the first time, we aim to quantify the dust ejection angle and erosion depth for a low-thrust lander, test the effectiveness of the current erosion model, and provide reference information for future landing missions. We use image measurement methods to extract key parameters such as dust ejection angle and erosion depth from the landing image of CE-4. For comparison with the observation, we also employ an erosion model to estimate the erosion thickness. The dust appears at about 7 s before the lander touch the surface, with a height of 13 m above the surface. When the nozzle altitude was about 0.6 m, the dust ejection angle is measured to be above 7 degrees, while the dust ejection angle calculated by the particle trajectory method is less than 4.3 degrees for particle sizes smaller than 1 mm. For the first time, an average erosion depth of 0.7 cm is measured between 1.12 m and 2 m from the nozzle centerline for a low-thrust lander. The measurement corresponds to an erosion time duration from 1.1 s before landing to 0.4 s after landing. The measured erosion range using CE-4 data is much larger than the estimated erosion radius given by the previous erosion model. It indicates that the dust's angular distribution, local topography of the landing area, and other factors are important in improving the precision of the erosion model.

Study of Shielding Solution for Lunar Surface Work of Chang'e-4 Lander

Ejection-Style Self-Imaging System Design And Finite Element Analysis For Lunar Lander

Design of Chang'e-4 Lunar Farside Soft-Landing Mission

Topography And Illumination Conditions Of Chang'E-4 Landing Area

Lunar Polar Illumination and Electrical Field Environment Simulation Based on a Conceptual Design for China's Chang'E-7 Mission

Landing Site Selection and Overview of China’s Lunar Landing Missions

TOPOGRAPHIC ANALYSIS OF CHANG’E-4 LANDING SITE USING ORBITAL, DESCENT AND GROUND DATA

Illumination Conditions Near the Moon's South Pole: Implication for a Concept Design of China's Chang’E−7 Lunar Polar Exploration

Artemis III Pre-Selected Landing Sites Engineering Suitability Analysis with Illumination, Communication and Slope, Based on LOLA Terrain

Numerical Simulation of the Lunar Polar Environment: Implications for Rover Exploration Challenge

Analysis of Plume–lunar Surface Interaction and Soil Erosion During the Chang’E-4 Landing Process

Topographic and Geomorphological Mapping and Analysis of the Chang'E-4 Landing Site on the Far Side of the Moon

Mission Design of Chang'e-4 Probe System

Analysis of Illumination Conditions in the Lunar South Polar Region Using Multi-Temporal High-Resolution Orbital Images

The Lunar Lander Neutron and Dosimetry (LND) Experiment on Chang'E 4

Research on Impact Process of Lander Footpad Against Simulant Lunar Soils

The Lunar Lander Neutron and Dosimetry (LND) Experiment on Chang’E 4

Simulation and Experimental Study of the Plume During the Chang'E-3 Lunar Landing

Thermal Protection of a Lunar Lander from Multi-Engine Plumes Using Thin Film Cooling

An Overview of the Mission and Technical Characteristics of Change’4 Lunar Probe

Lunar regolith and substructure at Chang’E-4 landing site in South Pole–Aitken basin