Abstract:Engine turbo-compounding (TC) is an effective technology to improve the engine efficiency and cut down CO2 emission. A power turbine downstream of the conventional turbocharger turbine is used to recover the exhaust energy and transfer it into mechanical work. However, the performance of turbo-compound system deteriorates seriously at engine off-design points. It is mainly caused by the fact that the designs of turbocharger turbine and power turbine are independent from each other, failing to consider the effects of upstream swirls on the downstream power turbine performance.Analysis showed that the off-design conditions, off-design incidence loss, transition duct loss and non-uniformity inlet loss contributed to the deterioration performance of power turbine at off-design conditions. Among these reasons, the incidence loss played significant effect on power turbine's performance. The current research aims to improve the turbo-compounding performance at engine off-design conditions by counter-rotating turbine (CRT) configuration. CRT consists of a radial-flow turbocharger turbine and an axial-flow power turbine with counter-rotating direction. The main purpose is to decrease the incidence loss and turning loss in the power turbine stator by CRT. Performance comparisons between the counter- and co-rotating turbines have also been conducted.First, meanline analysis was carried out to investigate the influences of design parameters on the velocity triangles and turbine performance. Analysis shows that counter-rotating turbine requires the design of high reaction radial turbine. Then, the 1D preliminary design starts and it is followed by 3D detail design. Finally, the computational fluids dynamic (CFD) method was used to evaluate the counter-rotating turbines performance. Results show that the designed counter-rotating turbine improves the off-design performance effectively, with 3.8% increase of power turbine efficiency points at 1200rpm condition. Further analysis on the flow field was conducted and it was found that the flow angle distribution at upstream turbine exit was highly non-uniformity along the span. To weaken the non-uniformity may be a potential way to further improve the performance of turbo-compounding systems.

Optimization of Transonic Counter-Rotating Compressor in Stage-Environment

A throughflow-based optimization method for multi-stage axial compressor

Multi-Objective Design Optimization of a Transonic Compressor Rotor Using an Adjoint Equation Method

Aerodynamic Design Optimization Of The Last Stage Of A Multi-Stage Compressor By Using An Adjoint Method

Numerical Optimization for Stator Vane Settings of Multi-Stage Compressors Based on Neural Networks and Genetic Algorithms

Three-Dimensional Optimization of Blade Lean and Sweep for an Axial Compressor to Improve the Engine Performance

Three-Dimensional Aerodynamic Optimization of a Multi-Stage Axial Compressor

Optimization of cantilevered stators in an industrial multistage compressor to improve efficiency

Numerical Optimization of A Highly Loaded Compressor in Semi-Closed Cycles Using Neural Networks and Genetic Algorithms

Optimization Design of Aspect Ratio and Solidity of a Heavy-Duty Gas Turbine Transonic Compressor Rotor

A Novel Airfoil Design Method and its Application to the Optimization Design of a 3-Stage Transonic Compressor

Aerodynamic Design and Performance Analysis of a Vaneless Counter-Rotating Fan and Compressor

Performance Improvement of Transonic Centrifugal Compressors by Optimization of Complex Three-Dimensional Features

Design Optimization of the Last Stage of a 4.5-Stage Compressor Using a POD-based Hybrid Model

Optimal Design and Analysis of a High-Load Supersonic Compressor Based on a Surrogate Model

Design Optimization and Analysis of Exit Rotor with Diffuser Passage based on Neural Network Surrogate Model and Entropy Generation Method

Investigation on the Aerodynamic Performance and Flow Mechanism of Transonic Ultra-Highly Loaded Tandem-Rotor Stage

Design Of Counter-Rotating Turbine To Improve The Off-Design Performance Of Turbo-Compounding Systems

Optimized Aerodynamic Design of Multi-blade Rows of an Axial Compressor

Performance improvement of a transonic centrifugal compressor impeller with splitter blade by three-dimensional optimization