An Experimental Investigation of Aluminum Combustion in Composite Propellent

Xin LIU,Pei-jin LIU,Bing-ning JIN,Tian-hao YANG,Xiang-geng WEI
DOI: https://doi.org/10.13675/j.cnki.tjjs.2016.08.023
2016-01-01
Abstract:For the research of the dynamic combustion process at the surface and out of the burning surface of aluminum in the AP/HTPB propellant, the optical imaging method with the long distance microscope and high-speed camera were used. Experiments were carried out under 1MPa,3MPa and 5MPa filled with nitrogen. Under 3MPa and 5MPa,through the adoption of the neutral density filter (NDFI) with different transmissions in front of the camera,the problem that the overexposure of camera imaging due to the strong light of aluminum droplet combustion was solved,and there was no this problem in 1MPa. Then the flow velocity with the combus?tion gas was calculated by measuring the various location of the same diameter aluminum drops in the adjacent two images. The flow velocity of small size drops is fast,and the flow velocity of large size drops is slow. The ag?glomeration time of the aluminum drops in the propellant burning surface was also obtained. In the 1MPa experi?ment,the agglomeration time of the 200μm and 150μm drops are about 8ms and 6ms. Under 3MPa,the agglom?eration time of the 300μm and 200μm drops are about 5ms and 3ms. Under 5MPa,the agglomeration time of the 300μm and 150μm drops are less than 3ms and 1ms. When the pressure increases, the agglomeration time of the same diameter agglomerates becomes shorter. Under the same pressure, the time of the agglomeration with the smaller aluminum agglomerates is shorter.
What problem does this paper attempt to address?