Abstract:In this paper, first, the meso-debonding process of a GAP/CL20/AP composite solid propellant under uniaxial tension was analyzed using the advantages of the material point method (MPM) and the finite element method (FEM) for the first time; then, the numerical simulation results were compared with the experiments. Based on the basic principle of modeling with the material point method, grains of different sizes were generated quickly and efficiently. Next, the grains were dispersed into particles, and the position information of the particles was mapped onto the background grid, so the background grids were used to determine the position of the grains. After that, the generated AP and CL20 grains were imported into the commercial software Abaqus through python scripting codes for numerical calculation. Based on macro-mechanical tests and a micro-numerical simulation, this paper studies the micro-internal mechanism that affects the macro-mechanical properties of composite solid propellants. Three interface parameters needed to be determined by parameter inversion, and the value of the objective interpolation function minR was 0.05078%. From a comparison, it was found that the numerical simulation results are in good agreement with the experimental results in the aspects of micro-crack cracking characteristics and the nominal stress–strain curve of propellants. After that, the influence of interface parameters on the stress–strain curve are discussed. The research in this paper has high scientific value and engineering application value and can provide important reference and guidance for the design of composite solid propellants and its mechanical property analyses, so as to solve the structural integrity problem of solid rocket motor charges.

Research on Fracture Property of CMDB Propellant Based on Cohesive Zone Model

Experimental research on CMDB propellant fracture under impact load

Rate-dependent Constitutive Behavior and Mechanism of CMDB under Tension Loading

Cohesive Cracking Simulation of Concrete Using Effective Modulus

Mechanical Behaviors and Failure Mechanisms of CMDB Propellant under Wide Strain Rate Tension Loading

Cohesive Fracture Investigation of HTPB Propellant

Cohesive Zone Modeling of Propellant and Insulation Interface Debonding

Numerical simulation of crack propagation in solid propellant with extrinsic cohesive zone model

Fracture Morphologies of CMDB Propellant

Computational Technique for Crack Propagation Simulation in Viscoelastic Solid Propellant

Modeling and Simulation of the Debonding Process of Composite Solid Propellants

A Constitutive Model of the Solid Propellants Considering the Interface Strength and Dewetting

The Effect of Strain Rate on Compressive Behavior and Failure Mechanism of CMDB Propellant

The Mesoscopic Numerical Simulation of GAP/CL20/AP Composite Solid Propellant Based on MPM and FEM

Fracture Behavior Investigation of the Propellant Material Using the Extended Finite Element Method

TWO TYPES OF CRACKS ON CAVITY SURFACE OF HIGH-LOADED SOLID PROPELLANT GRAIN

Inversion Identification of Constitutive Model of Cohesive Zone in HTPB Propellant

Finite Element Modeling of Propellant and Inhibitor Interface Debonding

Review of the Mechanical Properties and Numerical Simulation of Composite Solid Propellants

Microstructural Simulations of Debonding, Nucleation, and Crack Propagation in an HMX-MDB Propellant

Research on Dynamic Fracture Behavior of Polymer Bonded Explosive Simulant Based on Cohesive Crack Model