Abstract:Pre-chamber jet ignition is a promising combustion technology to accelerate burning velocity and improve combustion stability in natural gas engines. In this study, firstly, the ignition characteristics and the dilution limits in passive pre-chamber system with different orifice diameters were experimentally investigated based on a rapid compression machine (RCM). Methane (CH4) was used as the test fuel and CO2/N2 was used as the dilution components to simulate exhaust gas recirculation conditions in engines. Real-time combustion pressures were recorded and combustion images were captured using high-speed photography to visualize the entire jet ignition and combustion process. The experimental results showed that two different ignition behaviors were observed regarding to different orifice diameters. And no capacity of extending CO2/N2 dilution limits in the passive pre-chamber system compared to conventional spark ignition system. Then three-dimensional numerical simulations were conducted based on the experimental results. Simulation results demonstrated two ignition modes, pre-chamber jet flame ignition and pre-chamber jet autoignition, were presented due to the different jet temperatures, concentrations of immediate species, and turbulence intensities. Lastly, based on the numerical model, the effects of pre-chamber structure parameters on the ignition modes and potentials of different dilution state of mixture in pre-chamber for extending dilution limits were numerically studied. It was found that the ratio of total effective cross-sectional area of orifices to pre-chamber volume (At/VPC) was the key structure parameter of pre-chamber systems to determined different ignition modes. And there was a narrow critical range of At/VPC to achieve pre-chamber jet autoignition (PJAI) mode, beyond which PJFI mode or ignition failure occurred. The actual dilution rate of mixture in the pre-chamber affected the ignition probability and stability in the main chamber. Improving the chemical reactivity of mixture in the pre-chamber was beneficial to effectively extend the dilution limits due to the stronger thermal, chemical, and turbulent effects of pre-chamber jet.Abbreviations: PJI Pre-chamber jet ignition; CSI Conventional spark ignition; NG Natural gas; PM Particulate matter; SI Spark ignition; CI Compression ignition; THC Total hydrocarbon; SCR Selective catalyst reduction; TWC Three-way catalyst; EGR Exhaust gas recirculation; BSFC Brake specific fuel consumption; DI Direct injection; RCM Rapid compression machine; CVB Constant volume bomb; TDC Top dead center; BDC Bottom dead center; CFD Computational fluid dynamics; SOC Start of combustion; PJAI Pre-chamber jet auto-ignition; PJFI Pre-chamber jet flame ignition; TKE Turbulent kinetics energy

Experimental Study of Forced Ignition Process with Active Cavity Injection in a Supersonic Flow

Effects of Additional Cavity Floor Injection on the Ignition and Combustion Processes in a Mach 2 Supersonic Flow

Computational Study of the Effect of Dual Air Swirling Injection on Turbulent Combustion of Kerosene–Air at a High Pressure

Effect of cavity arrangement on the ignition mode of vaporized kerosene in supersonic flow

Experimental Investigation of Multichannel Plasma Igniter in a Supersonic Model Combustor

Experimental investigation of flow field features and spark ignition process in a multi-swirl airblast injector

Multi-channel gliding arc plasma-assisted ignition in a kerosene-fueled model scramjet engine

An Optical Study on the Ignition and Flame Development Initiated by a Combination of Passive Pre-Chamber and Spark Ignition

Experimental Research on Ignition Process of a Supersonic Combustor Based on a Strut Fueled with Liquid Kerosene

Effect of kerosene injection states on mixing and combustion characteristics in a cavity-based supersonic combustor

Generation and Propagation Characteristics of an Auto-Ignition Flame Kernel Caused by the Oblique Shock in a Supersonic Flow Regime

Investigation on Ignition Enhancement Characteristics by High-Energy Spark in a Scramjet Combustor under Low Flight Mach Conditions

SHOCK-TUNNEL EXPERIMENTAL STUDY OF COMBUSTION ENHANCEMENT METHODS FOR A HIGH-MACH-NUMBER SCRAMJET

Experimental Investigation on Gliding Arc Discharge Plasma Ignition and Flame Stabilization in Scramjet Combustor

Experimental study of axial spark location effects on transient flame/flow dynamics during ignition in a kerosene-fueled gas turbine model combustor

Experimental Investigation on Gliding Arc Plasma Ignition and Assisted Combustion Actuator

Large Eddy Simulation of Flame Propagation During the Ignition Process in an Annular Multiple-Injector Combustor

Ignition Enhancement of Liquid Kerosene by a Novel High-Energy Spark Igniter in Scramjet Combustor at Mach 4 Flight Condition

Flame Stabilization and Local Combustion Modes in a Cavity-Based Scramjet Using Different Fuel Injection Schemes

Experimental and Numerical Study of a Methane-Fueled Pre-chamber System in Rapid Compression Machine

Experimental investigation of the ignition process in a separated dual-swirl spray flame