Abstract:Advanced powertrain technologies have improved engine performance with higher power output, lower exhaust emission, and better controllability. Chief among them is the development of spark-ignition direct-injection (SIDI) engines in which the in-cylinder processes control the air flow motion, fuel–air mixture formation, combustion, and soot formation. Specifically, intake air with strong swirl motion is usually introduced to form a directional in-cylinder flowfield. This approach improves the mixing process of air and fuel as well as the propagation of flame. In this study, the effect of intake air swirl on in-cylinder flow characteristics was experimentally investigated. High-speed particle image velocimetry (PIV) was conducted in an optical SIDI engine to record the flowfield on a swirl plane. The intake air swirl motion was achieved by adjusting the opening of a swirl ratio (SR) control valve which was installed in one of the two intake ports in the optical engine. Ten opening angles of the SR control valve were adjusted to produce an intake SR from 0.55 to 5.68. The flow structures at the same crank angle degree (CAD), but under different SR, were compared and analyzed using proper orthogonal decomposition (POD). The flow dominant structures and variation structures were interpreted by different POD modes. The first POD mode captured the most dominant flowfield structure characteristics; the corresponding mode coefficients showed good linearity with the measured SR at the compression stroke when the flow was swirling and steady. During the intake stroke, strong intake air motion took place, and the structures and coefficients of the first modes varied along different SR. These modes captured the flow properties affected by the intake swirl motion. Meanwhile, the second and higher modes captured the variation feature of the flow at various CADs. In summary, this paper demonstrated a promising approach of using POD to interpret the effectiveness of swirl control valve on in-cylinder swirl flow characteristics, providing better understanding for engine intake system design and optimization.

Effects of Primary Swirl Intensity on Flow and Fuel Distribution Downstream a Dual-Swirl Cup

The Effect of Swirling Injector Geometry on the Flow Dynamics of Precessing Vortex Core

POD and DMD Analysis of Dynamic Flow Structures in the Recirculation Region of an Unconfined Swirl Cup

INVESTIGATION OF ATOMIZATION PERFORMANCE ON A CENTRIFUGAL FUEL SLINGER WITH A PHASE DOPPLER ANEMOMETER

Numerical Simulation for Effects of Venturi Tube on Swirling Flow Field

Numerical Simulation of Effects of Venturi Tube Throat Diameter on Flow Field of Combustor

Swirling flow and spray atomization interactions in a swirl cup airblast fuel injector: Outer swirler effect

Computational Study of the Effect of Dual Air Swirling Injection on Turbulent Combustion of Kerosene–Air at a High Pressure

The effects of swirl number on the combustion characteristics in an internally-staged combustor

Numerical Investigation on Mechanism of Swirling Flow of the Prefilming Air-Blast Fuel Injector

Experimental and Numerical Investigation of the Non-Reacting Flow in a High-Fidelity Heavy-Duty Gas Turbine DLN Combustor

Investigation of Swirl Ratio Impact on In-Cylinder Flow in an SIDI Optical Engine

Investigation of Flame and Flow Response in the Swirler with Different Divergence Cups and Central Body under External Excitation

Numerical investigation of inlet guiding ring effect on combustor flow field with multiple swirler structures

Isothermal swirling flow characteristics and pressure drop analysis of a novel double swirl burner

Piston geometry effects in a light-duty, swirl-supported diesel engine: Flow structure characterization

Effects of swirling motion on the cavity flow field and combustion performance

Experimental Study of Particle-Laden Turbulent Reacting Flow in a Swirl Combustor

Turbulence Characteristics of Swirling Reacting Flow in a Combustor with Staged Air Injection

Effect of swirl number on the number of particle impacts near a swirl burner outlet

Experimental study on combustion flow field characteristics of swirl combustor