Abstract:Aluminum(Al)/ammonium perchlorate(AP)/hydroxyl-terminated polybutadiene (HTPB) propellant is the most widely used propulsion system currently. Its ignition and combustion processes are fairly complex and need to be better understood. In this study, the thermal decomposition, ignition, and combustion properties of an Al/AP/HTPB propellant were investigated using a thermogravimetry–differential scanning calorimetry and a laser ignition testing system. The morphology and size distribution of the condensed combustion products (CCPs) were analyzed using a laser particle size analyzer and scanning electron microscopy. Results showed that the thermal decomposition process of the propellant consisted of three stages. The first stage (100–430 °C) was a major mass loss stage and exhibited typical features of AP decomposition. The second stage (430–630 °C) was mainly accompanied by the decomposition of remaining HTPB as well as slight oxidation of Al particles. In the third stage, further oxidation of Al particles resulted in a small mass increase. Due to the continuous emission problem, only a few combustion intermediates were identified in the combustion emission spectrum curves. The propellant combustion process could be roughly divided into three stages, and the flame development stage lasted longer than the flame decline stage. As the pressure increased, the propellant ignition delay time decreased and the burning rate increased significantly. The effect of pressure on ignition delay was more pronounced at low pressures. The CCPs consisted of three types. The oxidation of Al particles in the propellant followed the diffusion reaction mechanism. Agglomerates appeared in several different morphologies and had relatively low combustion efficiency under experimental conditions. A 2-D pocket-like structure was observed on the propellant surface.

Effect of Metal and Composite Metal Nanopowders on the Thermal Decomposition of HTPB Propellant

Effects of Metal and Composite Metal Nanopowders on the Thermal Decomposition of Ammonium Perchlorate (AP) and the Ammonium Perchlorate/Hydroxyterminated Polybutadiene (AP/HTPB) Composite Solid Propellant

Effects of nano NiO/CNTs and Co_3O_4/CNTs on thermal decomposition of AP and HTPB / AP propellant

Catalysis of nano-NiCu composite powder on the pyrolysis of AP and AP/HTPB propellant

A Study of Catalyzing Thermal Decomposition and Combustion of AP/HTPB Propellant with Nano Cu/CNTs

Effects of nano TMO/CNTs composite particles on the thermal decomposition of AP and AP/HTPB

Preparation of Co3O4/CNTs Composites and Their Catalytic Effects on the Thermal Decomposition of AP and AP/HTPB Propellant

Effect of Magnesium Based Hydrogen Storage Materials on the Properties of Composite Solid Propellant

Synthesis and Catalytic Properties of NiCu Composite Metal Nanopowder

Effect of complex metal hydride on the thermal decomposition behavior of AP/HTPB-based aluminized solid rocket propellant

Modification Of Carbon Nanotube And Thermal Decomposition Behavior Of Ammonium Perchlorate

Preparation of carbon nanotubes/HTPB and research of catalytic performance

Nano-aluminum double coated with copper and HTPB by one pot method and its catalysis on AP

Research on the Combustion Properties of Propellants with Low Content of Nano Metal Powders

Thermal decomposition and combustion characteristics of Al/AP/HTPB propellant

Examining the impact of nano‐sized Litharge, Tenorite, and Hematite on the thermal decomposition of ammonium perchlorate‐based cross‐linked composite modified double base propellant

Effect of Nano Metal Powder on the Thermal Decomposition Characteristics of HMX

The Effect Of Nano Metal Powders On The Thermal Decomposition Kinetics Of Ammonium Perchlorate

Thermal Behavior of Hmx and Metal Powders of Different Grade

The catalytic thermal decomposition of ammonium perchlorate on CuMxOy (M = Fe, Ni, Co and Zn) catalysts and their applications in solid propellant