Abstract:In many combustion systems, fuel atomization and the spray breakup process play an important role in determining combustion characteristics and emission formation. Due to the ever-rising need for better fuel efficiency and lower emissions, the development of a fundamental understanding of its process is essential and remains a challenging task. The Spray-A case of the Engine Combustion Network (ECN) is considered in the study, in which liquid n-Dodecane (Spray-A) is injected at 1500 bar through a nozzle diameter of 90 μm into a constant volume vessel with an ambient density of 22.8 kg / m3 and an ambient temperature of 900 K. The unsteady Reynolds averaged Navier-Stokes (URANS) in conjunction with k-ε turbulence model is used to investigate the flow physics in a two-dimensional axisymmetric computational domain. A reduced chemical mechanism from Wang et al. [1] with 100 species and 432 reactions is invoked to represent the kinetics. The gas and liquid phases are modeled using Eulerian-Lagrangian coupled approach. The present model is validated with the experimental data as well as computational data of Pei et al. [2]. Initially, the effects of various turbulence models with modified constants are examined without introducing the breakup phenomena in the computational physics. Later on, primary and secondary breakup processes of the liquid fuel are taken into account. In the present study, we examine the effects of secondary breakup modeling on the spray under high-pressure conditions using different breakup models, including Wave, Kelvin-Helmholtz and Rayleigh-Taylor (KH-RT) and Stochastic Secondary Droplet (SSD) models. It has been observed that KH-RT model is more dominant in such high-pressure sprays and predict physics more accurately as compared to other models. The dominance of convection as well as diffusion controlled vaporization model is also realized over the diffusion controlled vaporization model. The investigations at different fuel injection pressures are also modeled and validated with the experimental data [3]. The results strongly suggest that applying high-pressure, leads to high injection velocity and momentum which enhances the air entrainment near the injector region and the mixing process.

Droplet Collision and Coalescence Model and Its Application in the Spray Combustion Simulation

Numerical Simulation of the Collision Behaviors of Binary Unequal-Sized Droplets at High Weber Number

Simulation of Droplet-gas Flow in the Effervescent Atomization Spray with an Impinging Plate

Numerical Simulation for Combustion of Droplet with Volume of Fluid Formulation

Three-Dimensional Simulation Of Effervescent Atomization Spray

Direct numerical simulation of three-dimensional swirling n-heptane spray flames

Direct Numerical Simulations and Analysis of Three-Dimensional N-Heptane Spray Flames in a Model Swirl Combustor

Study on Instability Breakup of Fluid Droplet in Spray Process

Numerical Models For Viscoelastic Liquid Atomization Spray

Modeling Droplet Vaporization and Combustion with the Volume of Fluid Method at a Small Reynolds Number

A Pure Eulerian Model for Simulating Dilute Spray Combustion

A new robust modeling strategy for multi-component droplet heat and mass transfer in general ambient conditions

Effects of operating conditions on droplet deposition onto surface of atomization impinging spray

Application of droplet motion and evaporation model in fuel spray in the constant volume bomb

Simulations of Non-Reacting Transient N-Dodecane Spray in a High-Pressure Combustion Vessel

Spray flames in an air-heptane swirling combustor

PDF Modelling of Spray Autoignition in High Pressure Turbulent Flows

THREE-DIMENSIONAL NUMERICAL SIMULATION ON SPRAY COMBUSTION IN A LOX-HYDROGEN ENGINE

Numerical Simulation of Aerosol Dynamics in an Impinging Jet with Microdroplet Coalescence

Simulating low temperature diesel combustion with improved spray models

Droplet Collision in Liquid Propellant Combustion