Abstract:Since temperatures of airfoil surfaces in advanced turbine engines are approaching the limit of nickel base superalloys, Nb-Ti-Si base alloys as their potential materials have attracted much attention recently. Nb-Ti-Si base alloys have high melting temperature, suitable densities, good elevated temperature creep strength and acceptable room temperature fracture toughness, therefore, they are expected to be employed in the temperature range of 1200-1450 ℃ as structural materials. Alloying and directional solidification are generally used to obtain a better combination of room temperature fracture toughness with high temperature creep strength and oxidation resistance for an elevated-temperature alloy. In this paper, the master alloy ingot with a nominal composition of Nb20Ti-16Si-6Cr-5Hf-4Al-2B-0.06Y (atomic fraction, %) was prepared by using vacuum consumable arc-melting. The integrally directional solidification of this alloy was conducted in a high vacuum and ultrahigh temperature directional solidification furnace with the use of a ceramic crucible at melt temperature of 2050 ℃. The integrally directionally solidified microstructure, preferred orientation of constituent phases and solid/liquid (S/L) interface morphology at different solidifying rate (2.5, 5, 10,20, 50 and 100 μm/s) for this alloy have been investigated by XRD, SEM and EDS, and the growth mechanism of Nbss/(Nb, X)_5Si_3 (where Nbss denotes Nb solid solution, X represents Ti, Hf and Cr elements) eutectic in it has been discussed. The results show that the directionally solidified microstructure of the alloy is mainly composed of hexagonally cross-sectioned primary (Nb, X)_5Si_3 columns and coupled grown lamellar Nbss/(Nb, X)_5Si_3 eutectic colonies both aligned straight and uprightly along the growth direction. When the solidifying rate varies from 2.5 μm/s to 100 μm/s, the solid/liquid interface of the alloy undergoes an evolution from coarse cellular, fine cellular and finally to cellular dendrite morphologies. Both the average diameter of eutectic cells and lamellar spacing in them decrease with the increase in solidifying rate. The formation of a regular Nbss/(Nb, X)_5Si_3 eutectic morphology is attributable to a large kinetic undercooling and a low fusion entropies of alloy phases.

Research Progress on Ultra-high-temperature Nb-silicide-based Alloys

Research Progress in Directional Solidification of Nb-Si Based High Temperature Alloys

MICROSTRUCTURE AND SOLID/LIQUID INTERFACE MORPHOLOGY EVOLUTION OF INTEGRALLY DIRECTIONALLY SOLIDIFIED Nb-SILICIDE-BASED ULTRAHIGH TEMPERATURE ALLOY

Research Progress on Nb-Si Base Ultrahigh Temperature Alloys and Directional Solidification Technology

Progress in Nb-Si Intermetallics Based Ultra-High Temperature Alloys

Overview of Powder Forming Research on Nb-Si-based Ultra-High Temperature Alloys

EFFECT OF SOLIDIFYING RATE ON INTEGRALLY DIRECTIONALLY SOLIDIFIED MICROSTRUCTURE AND SOLID/LIQUID INTERFACE MORPHOLOGY OF AN Nb-Ti-Si BASE ALLOY

Research Progress And Prospect Of High Nb Containing Tial Alloys Directional Solidification

Progress in the Compositional Design and Mechanical Properties of Advanced Ultrahigh Temperature Nb-Silicide Based In-Situ Composites(RMICs)

Eutectic Microstructure Evolution of Directionally Solidified Nb-Ti-Si Base Ultrahigh Temperature Alloy

Research Progress in the Directionally Solidified Microstructure and the Eutectic Solidification Theory of Niobium-based Ultrahigh-temperature Alloy

Simulation of Temperature Field in Directional Solidification Casting of Nb-Si Based Alloys

Investigation on the as-cast microstructure of Nb–Nb silicide based multicomponent alloys

Oxidation Resistance and Mechanical Characterization of Silicide Coatings on the Nb-18Ti-14Si-9Al Alloy

Microstructure and Compositional Distribution in Arc-melted Advanced Nb-silicide-based Ultrahigh Temperature Alloy

Research Progress in High Temperature Oxidation Resistance of Nb-Based Alloys

INTEGRALLY DIRECTIONALLY SOLIDIFIED MICROSTRUCTURE OF AN NIOBIUM SILICIDE BASED ULTRAHIGH TEMPERATURE ALLOY

Alloying effects on the microstructure and properties of Nb–Si based ultrahigh temperature alloys

Microstructure, mechanical properties and oxidation resistance of Nb silicide based ultrahigh temperature alloys with Hf addition

High-performance Nb Alloy Featuring a Hierarchical Carbides Configuration for Elevated-Temperature Applications

Simultaneous Improving High Temperature Oxidation Resistance and Room Temperature Toughness of Nb Si Based Alloy Via Appropriate Ta Content Addition Strategy