Abstract:Multi-stage Roots dry vacuum pumps are widely used in the semiconductor industry, metallurgy, pharmaceuticals, solar photovoltaic, thin film equipment, and other such fields. There are many combinations of rotors from the inlet to the exhaust of the multi-stage Roots vacuum pump. Depending on the application process of the multi-stage Roots vacuum pump, different rotation and self-combination designs are required. Currently, the pumping characteristics of different rotor types of the multi-stage Roots dry vacuum pump are not clear, and the combined design of the multi-stage pump rotor cannot be supported. In order to realize the applicability analysis of different rotors in different pressure ranges, a vacuum pump test platform and an adjustable rotor Roots experimental pump were designed. The pumping performance and power consumption of two-lobe Roots rotors, three-lobe Roots rotors and five-lobe Roots rotors in different pressure ranges were tested in experiments, and the internal flow conditions of multi-stage pump exhaust stages were numerically simulated. The results demonstrate that considering the ultimate performance and power consumption, the two-lobe Roots rotors and the three-lobe Roots rotors are more suitable for the exhaust pressure range of 1–10,000 Pa. With the increase of the exhaust pressure, the pumping performance of the three-lobe Roots rotors begins to gradually improve, and the pumping performance has obvious advantages. When the exhaust pressure exceeds 50,000 Pa, the advantages of the five-lobe Roots rotors gradually become obvious. The five-lobe Roots rotors can better handle the process of direct exhaust to atmosphere. The research methods and conclusions adopted in this paper can provide a reference for the design of the rotor combination scheme of the multi-stage Roots dry vacuum pump.

Research on Design of a New Type Three Lobe Roots Compressor

Research on the Flow Path Design Method of Axial Flow Compressor of Gas Turbine

Effects of rotational speed and blade profile on mass flow at exhaust port in roots compressor

Three-Dimensional Compressor Blading Design Improvements in Low-Speed Model Testing

Optimization Design of Aspect Ratio and Solidity of a Heavy-Duty Gas Turbine Transonic Compressor Rotor

Geometric study and simulation of an elliptical rotor profile for Roots vacuum pumps

Design of rotor profile of a new roots vacuum pump

Design And Test Of A Novel Highly-Loaded Compressor

Aerodynamic Analysis and Three-Dimensional Redesign of a Multi-Stage Axial Flow Compressor

Three-Dimensional Optimization of Blade Lean and Sweep for an Axial Compressor to Improve the Engine Performance

Research on pumping laws of different-shaped Roots rotors for multi-stage vacuum pump design

Rotor profile improvement by optimizing meshing curve for helical roots blowers in HFCV application

Design and analysis of conical rotary compressor

Roots multi‐lobe vacuum pumps with external compression

Influence of Different Reflux Groove Structures on the Flow Characteristics of the Roots Pump

A Novel Airfoil Design Method and its Application to the Optimization Design of a 3-Stage Transonic Compressor

Investigation on Aerodynamic Performance of a Centrifugal Compressor with Leaned and Bowed 3D Blades

Design and Performance Analysis of a Two-Stage Transonic Low-Reaction Counter-Rotating Aspirated Fan/compressor with Inlet Counter-Swirl

Design and Internal-flow Field Analysis of New Two-stage Centrifugal Compressor

Three-Dimensional Aerodynamic Optimization Of A Multi-Stage Axial Compressor

INVESTIGATION OF THE MAP WIDTH IMPROVEMENT IN A RADIALLY REDUCED DIFFUSER DESIGN CONCEPT FOR A CENTRIFUGAL COMPRESSOR