Abstract:The establishment of the highly conductive top layer is due to the zero‐dimensional iron tetraoxide modification of the reduced graphene oxide of the two‐dimensional sheet layer, plus the addition of the one‐dimensional highly conductive silver nanowires, which makes the conductive nodes of the three‐dimensional network more perfectly established. The strong vacuum filtration effect will establish a closely connected two‐layer three‐dimensional conductive network. These combined effects enhance the electromagnetic absorption loss effectiveness of the double‐layer composite film. With the renewal of electromagnetic shielding materials, conducting polymer electromagnetic shielding composites stand out. In the article, ferric tetraoxide‐modified reduced graphene oxide (RGO@Fe3O4), silver nanowires (AgNWs) and polyvinylpyrrolidone (PVP K30) were blended to form a solution colloid, and polyvinylidene fluoride/carbon nanotubes (PVDF/MWCNTs)‐3 wt% composite film was used as the substrate, then the PVDF‐based bilayer composite films were prepared by vacuum‐assisted filtration (VNF).When RGO@Fe3O4 was added in the amount of 10 mL, the electrical conductivity of PVDF/MWCNTs/RGO@Fe3O4‐10 bilayer composite film is 1.7 × 101 S·m−1, the total electromagnetic shielding effectiveness (EMI SET) was 20.4 dB, of which the absorption loss accounted for 82.4%, and the specific electromagnetic shielding effectiveness (SSE/t) was 590.9 dB/(cm2·g−1). After the addition of 25 mL AgNWs, the electrical conductivity of PVDF/MWCNTs/RGO@Fe3O4/AgNWs‐25 bilayer composite film up to 4.9 × 104 S·m−1, the EMI SET was 94.4 dB, of which the absorption loss accounted for 85.4%, and the specific electromagnetic shielding effectiveness (SSE/t) was 3629.3 dB/(cm2·g−1). It indicates that the electromagnetic shielding mechanism of both bilayer composite films is dominated by absorption loss. The addition of RGO@Fe3O4/AgNWs increases the electrical conductivity and electromagnetic shielding effectiveness of the bilayer composite films more than RGO@Fe3O4. The successful preparation of this bilayer composite film makes it possible to form lightweight superconducting nanoparticles from high‐density metal‐modified carbon‐based materials, which provides an easy method for the preparation of highly conductive electromagnetic shielding composites. Highlights In this article, well dispersed highly conductive‐doped nanomaterials Fe3O4@RGO were prepared and characterized by hydrothermal synthesis. In this article, silver nanowires with good conductivity and high aspect ratio were prepared and characterized by liquid phase polyol method. In this article, three‐dimensional mesh PVDF‐based bilayer composite films with more excellent electromagnetic shielding properties were prepared by solution blending and vacuum‐assisted filtration using PVDF/MWCNTs‐3 wt% composite films as substrates. In this article, the electromagnetic shielding mechanism of bilayer composite films is discussed from the knowledge of three‐dimensional aspects.

Design of 3D Graphene Network Composites for Optimal Performance of Electromagnetic Wave Interference Shielding

3D graphene/ carbon nanotubes/ polydimethylsiloxane composites as high-performance electromagnetic shielding material in X-band

Modified carbon fiber/magnetic graphene/epoxy composites with synergistic effect for electromagnetic interference shielding over broad frequency band

3D Ti3C2Tx MXene/C Hybrid Foam/epoxy Nanocomposites with Superior Electromagnetic Interference Shielding Performances and Robust Mechanical Properties

Design of 3D graphene‐Ni microsphere based polymeric composites for highly efficient and absorption‐dominated electromagnetic interference shielding performance

Lightweight Microwire/graphene/silicone Rubber Composites for Efficient Electromagnetic Interference Shielding and Low Microwave Reflectivity

Fe Nanoparticles and CNTs Co-Decorated Porous Carbon/graphene Foam Composite for Excellent Electromagnetic Interference Shielding Performance

Multi-layer carbon fiber paper @reduced graphene oxide/Co/C composite with adjustable electromagnetic interference shielding properties

Graphene Oxide/Carbon Tube Composite Films with Tunable Porous Structures for Electromagnetic Interference Shielding

Multifunctional electromagnetic interference shielding 3D reduced graphene oxide/vertical edge-rich graphene/epoxy nanocomposites with remarkable thermal management performance

Carbon Nanotube–Multilayered Graphene Edge Plane Core–Shell Hybrid Foams for Ultrahigh‐Performance Electromagnetic‐Interference Shielding

Multilayer Structured CNF/rGO Aerogels and Rgo Film Composites for Efficient Electromagnetic Interference Shielding

PVDF/MWCNTs/RGO@Fe3O4/AgNWs composite film with a bilayer structure for high EMI shielding and electrical conductivity

High shielding effectiveness of multilayer graphene oxide aerogel film/polymer composites

Facile and Green Process to Synthesize a Three-Dimensional Network Few-Layer Graphene/Carbon Nanotube Composite for Electromagnetic Interference Shielding

Ti3C2Tx/rGO porous composite films with superior electromagnetic interference shielding performances

Flexible Fe3O4/graphene Foam/poly Dimethylsiloxane Composite for High-Performance Electromagnetic Interference Shielding

Lightweight graphene foam composites with enhanced electrical conductivity and microwave absorption for electromagnetic interference shielding

Preparation and properties of reduced graphene oxide-carbon nanotubes aerogel/cotton flexible composite fabric with electromagnetic shielding function

High-efficiency Electromagnetic Interference Shielding Realized in Nacre-Mimetic Graphene/polymer Composite with Extremely Low Graphene Loading

High-Efficiency Electromagnetic Interference Shielding of rGO@FeNi/Epoxy Composites with Regular Honeycomb Structures