Study on the Mechanical Properties of Metal Rubber with Complex Contact Friction of Spiral Coils based on Virtual Manufacturing Technology
Zhiying Ren,Liangliang Shen,Hongbai Bai,Ling Pan,Jie Xu
DOI: https://doi.org/10.1002/adem.202000382
IF: 3.6
2020-05-27
Advanced Engineering Materials
Abstract:<p>Metal rubber (MR) is an elastic porous material with a complex spiral network structure, which is widely used in aerospace, aviation, navigation, medical biomaterials and other fields. The traditional preparation processes depend on multiple tests or artificial experience, which leads to time‐consuming and laborious. In this paper, a virtual manufacturing method is proposed to realize the spatial multi‐point dynamic contact analysis of complex spiral network structure, that is, to study the mechanical properties of MR from the micro tribological point of view. Through real‐time capturing the spatial distribution characteristics of each contact point, the number of contact pairs and contact mode, it is found that the number of dry friction contact points between the wires is nonlinear positive correlation to the damping energy dissipation characteristics of MR. The preparation parameters such as the wire diameter, the spiral wire pitch, and the blank winding angle were selected to be investigated, and the controlling variable method was used to analyze the single factor influence in the virtual preparation process. The results show that the damping and energy consumption characteristics of MR can be improved effectively by reducing the wire diameter, by reducing the spiral wire pitch, or by increasing the winding angle of the blank. However, too small or too large preparation parameters will cause stress concentration and affect the mechanical properties of the actual materials. The quasi‐static compression test was carried out through the preparation of the products and the error between simulation and experiment results is less than 8%. In this paper, the mechanism of contact friction between wire turns in MR was expounded. And this method can effectively guide the production of MR material, reduce the time of material design, and promote the popularization and application of the material.</p><p>This article is protected by copyright. All rights reserved.</p>
materials science, multidisciplinary