Abstract:It is known that pressure fluctuations are generated from intermediate vehicles of Shinkansen trains. Those pressure fluctuations involve the infra-sound phenomenon with a wavelength longer than several meters. Past studies showed that the infra-sound consists of the aerodynamic and structure-borne components, and the aerodynamic component is originated in the high-speed airflow around vehicles. The generating mechanism of the aerodynamic component, however, had been remained unclear. In this paper, a new methodology applicable to railway field tests is proposed to evaluate low-frequency aerodynamic sound less than 100Hz. A field test was conducted at a flat land without noise barriers, in which fifteen ultra-low frequency microphones constituting a linear microphone array were arranged in line along rails. In order to determine the frequency spectrum and distance decay rate, another five ultra-low frequency microphones were deployed at measurement points 8.7m to 50m apart from the nearest track center. The reason why the flat measurement site was selected was to suppress the bridge noise and focus on the aerodynamic noise during a train passage. On processing the microphone array signal to identify sound sources in field tests, much attention should be paid for the number of averaging; the number of averaging were limited so that sound source identification was difficult in practice. In this analysis, therefore, more than 100 trains were measured and ensemble-averaged to clarify the relationship between the number of averaging and precision of determining sound sources. Our field test campaign showed that low-frequency aerodynamic sound was locally distributed around all sections between two neighbouring bogies and pantograph sections.

A System for Pressure Wave Detection of Passing Trains

A New Laser Displacement Sensor Based on Triangulation for Gauge Real-Time Measurement

Ultrasonic Dynamic Plane Wave Imaging for High-Speed Railway Inspection

An FBG-Based Sensor Tailor-Made for Wind Pressure Monitoring of High-Speed Trains

Three-dimensional characteristics of pressure waves induced by high-speed trains passing through tunnels

Pressure transients induced by a high-speed train passing through a station

Experimental Study of Static and Dynamic Loading Effects on Guided Wave-Based Intelligent Monitoring of Welded Rail Joints

A Non-Intrusive Pressure Sensor by Detecting Multiple Longitudinal Waves

Full-Scale Measurement of Micropressure Waves in High-Speed Railway Tunnels

Identification of aerodynamic pressure fluctuations generated from high-speed trains passing an open section

Structural health monitoring of high-speed railways using ultrasonic guided waves

Research and application of testing technology of aerodynamics at train-tunnel entry on special passenger railway lines

Numerical simulation of pressure transients caused by high-speed train passage through a railway station

Design and evaluation of a remote measurement system for the online monitoring of rail vibration signals

Shock Wave Pressure Measurement System Function with Wireless Data Transmission and Control

Detection System about Train-wheels' Cracks Based on Electronic Ultrasonic Technology

Diffuse Ultrasonic Wave-Based Damage Detection of Railway Tracks Using PZT/FBG Hybrid Sensing System

A simple method for predicting pressure transients in high-speed subway tunnel based on train reflected waves

Experimental Research on the Coupling Aerodynamic Response of High-speed Trains Passing through Wind-break Wall

A Method for Shock Train Leading Edge Detection Based on Differential Pressure

Field Measurements of Aerodynamic Pressures in High-Speed Railway Tunnels