Abstract:In order to improve the economical efficiency and convenience during the bridge scour assessment,a theory of analyzing the bridge scour condition by tracing the dynamic performances of bridges was proposed.Based on the natural frequencies of vibration and modes of vibration after filtering,a structural flexibility matrix was established reflecting the bridge condition.Using such flexibility matrix,"calculatedly structural displacement discrepancy" was deduced based on a concerned direction of structural stiffness as an identification parameter of bridge scour.A quantitative relationship between the identification parameter and scour depth was then obtained after a series of parametric analysis.Meanwhile the actual value and dynamic performance were obtained during the bridge routine detection and measurement.Therefore,based on the pre-obtained relationship between structural displacement difference and scour depth,the bridge scour depth at the moment of monitoring was calculated corresponding to the practical value.Finally a simple support bridge was used to demonstrate the specific application methods and steps for the proposed condition assessment method of bridge scour in terms of identification of dynamic characteristics.The pile-soil springs along different directions were established based on the code of American Petroleum Institute (API).The bridge scour was simulated by sequentially removing the springs.The prerequisite of the proposed method in the real engineering was further given.The results show that the identified scour depths are equipped with acceptable accuracy and the coupling effects among different piers can be amended by fitting formulas.The qualitative and quantitative analysis of bridge scour in virtue of conventional project of bridge inspection has advantages of computational logic,convenience and economy of monitoring equipment.The scour depth can be correctly predicted as long as the dynamic performances of bridges are accurately measured and traced.

Condition Assessment of Bridge Scour by Tracing Dynamic Performances of Bridges

Identification of Bridge Scour Depth by Tracing Dynamic Behaviors of Superstructures

Bridge Scour Identification and Field Application Based on Ambient Vibration Measurements of Superstructures

Bridge scour identification based on time-frequency analysis of superstructures

Vibration-Based Identification for the Presence of Scouring of Cable-Stayed Bridges

Scour Depth Determination of Bridge Piers Based on Time-Varying Modal Parameters: Application to Hangzhou Bay Bridge

Investigation of the Dynamic Performance of a Large-Span Suspension Bridge Influenced by Scouring Based on Vehicle-Bridge Coupled Vibration

Advances in Vibration-Based Scour Monitoring for Bridge Foundations

Time-Frequency-Based Bridge Scour Identification by Trend-Change Detection

Foundation scour detection method based on dynamic responses of bridge due to vehicle braking

Identification Method for Pylon Scour Depth of Cable stayed Bridges by Tracing Dynamic Index

Scour Effect on Bridge and Vehicle Responses under Bridge–Vehicle–Wave Interaction

Evaluation of bridge instability caused by dynamic scour based on fractal theory

Validating Dynamic Identification of Foundation Scour Based on Large-Scale Water Flumes

CFD Simulations and Analyses for Bridge-Scour Development Using a Dynamic-Mesh Updating Technique

Development of Scour Monitoring Methods Based on Scour Effect Analysis

Scour effect on a single pile and development of corresponding scour monitoring methods

A simulation analysis on 3D bridge scour developments by various environment parameters

Scour Diagnosis Index Based on Cross-Correlation Analysis of Bridge Dynamic Response under Vehicle Braking

Protection mechanisms, countermeasures, assessments and prospects of local scour for cross-sea bridge foundation: A review

Strain-Based Structural Condition Assessment of an Instrumented Arch Bridge Using Fbg Monitoring Data