Abstract:The rapid development of highway traffic has gradually deteriorated the acoustic environment along the line. Sonic crystal theory provides new ideas for traffic acoustic barrier. However, the lack of practical numerical models and field test verifications has restricted the promotion and application of sonic crystal acoustic barriers (SCABs). In this study, a field test was conducted to study the noise reduction performance of SCAB. The SCAB exhibits excellent wave attenuation in the band gap, when compared with concrete acoustic barriers (CABs) along highways, the noise reduction performance in the band gap is improved by 0.5-2.1 dB(A), especially at the local peak in the highway noise spectrum. However, from the perspective of total insertion loss, CAB performs better than SCAB in all distances in the protected area. Next, the 3D FEM model is established based on the highway site and validated by the measured results. Compared with the commonly used 2D model, the 3D FEM model is more practical for considering the top diffraction and ground reflection, which influence the noise reduction performance a lot and need to be considered. To improve the noise reduction performance of SCAB, three types of optimization measures are explored. The gradient combination of scatterers can effectively improve the noise reduction effect in the low-frequency band gap, especially the high- to low-gradient layout. Besides, not only the porous sound-absorbing material but also the microperforated plates can improve the noise reduction effect, especially outside the band gap. The larger perforation rates and smaller apertures of microperforated plate are preferred in SCAB. This work provides field test support and promotes the application of SCABs in traffic noise control.

Contribution of Frequency Characteristics of Sound Ab-sorption Barrier to Noise Reduction

Comparative Study of Noise Reduction Effects of Different Sound Absorption Barriers

Study on Noise Reduction Performance of Sound Barrier with Acoustic Diffusers

Analysis and Optimization of the Noise Reduction Performance of Sound-Absorbing Materials in Complex Environments

Study of acoustic characteristics of noise barriers

Analysis on Influence Factors of Insertion Loss of Sound Absorption Noise Barrier in High-speed Railway

Modeling, analysis, and validation of an active T-shaped noise barrier

Noise reduction mechanisms of active noise barriers

A Study on Technique of Barrier for Railway Traffic Noise

Design of an adjustable sound-absorbing structure with low frequency advantages

Prediction of Noise Reduction Effect of Sound Barriers and Evaluation of Noise Annoyance

A Composite Structure for Low-Frequency Sound Absorption With Continuous Broadband Under High Sound Pressure Excitations

Influence of Absorber Location in a Typical Dwelling Layout on the Attenuation of Low-Frequency Outdoor Noise

A Review: Characteristics of Noise Absorption Material

Sound Absorbing Materials and Sound Energy Conversion

A study of sound intensity control for active noise barriers

Numerical modeling and field test of sonic crystal acoustic barriers

Effects of the Absorber Location on Low-Frequency Noise Control in Typical Dwelling Layouts

Parameter Study of Sound Energy Distribution in Cuboid Extra-Large Spaces

An ultra-low-frequency sound absorber and its application in noise reduction in ducts

Analysis on Noise Reduction Effect and Investment Benefits of Different Rail Transit Sound Barriers