Abstract:A design of semi-submersible platform is mainly based on the extreme response analysis due to the forces experienced by the components during lifetime. The external loads can induce the extreme air gap response and potential deck impact to the semi-submersible platform. It is important to predict air gap response of platforms accurately in order to check the strength of local structures which withstand the wave slamming due to negative air gap. The wind load cannot be simulated easily by model test in towing tank whereas it can be simulated accurately in wind tunnel test. Furthermore, full scale simulation of the mooring system in model test is still a tuff work especially the stiffness of the mooring system. Owing to the above mentioned problem, the model test results are not accurate enough for air gap evaluation. The aim of this paper is to present sensitivity analysis results of air gap motion with respect to the mooring system and wind load for the design of semi-submersible platform. Though the model test results are not suitable for the direct evaluation of air gap, they can be used as a good basis for tuning the radiation damping and viscous drag in numerical simulation. In the presented design example, a numerical model is tuned and validated by ANSYS AQWA based on the model test results with a simple 4 line symmetrical horizontal soft mooring system. According to the tuned numerical model, sensitivity analysis studies of air gap motion with respect to the mooring system and wind load are performed in time domain. Three mooring systems and five simulation cases about the presented platform are simulated based on the results of wind tunnel tests and sea-keeping tests. The sensitivity analysis results are valuable for the floating platform design.

Study on Primary Design of Soft Yoke Mooring System in Extreme Sea State

A Hydrodynamical Study on Motions and Mooring Loads of the Small Scale LNG Carrier

Theoretical Model and Dynamic Analysis of Soft Yoke Mooring System

Optimal Design Methodology For Multi-Component Mooring Systems In Deep Water

Design and Analysis of a Mooring System for a Wave Energy Converter

Design selection analysis for mooring positioning system of deepwater semi-submersible platform

Hydrodynamic Analysis of Three-Module Semi-Submersible Platform and Its Mooring Design

Optimal Design and Hydrodynamic Response Analysis of Deep Water Mooring System with Submerged Buoys

Global Responses Analysis of a Semi-Submersible Platform with Different Mooring Models in South China Sea

Sensitivity Analysis of Air Gap Motion with Respect to Wind Load and Mooring System for Semi-Submersible Platform Design

Performance analysis of the mooring system of a two-module scientific research and demonstration platform

Estimation of characteristic extreme response for mooring system in a complex ocean environment

Design of Mooring System for Oil Storage Vessels

Coupled Analysis of a Semisubmersible Platform with Two Types of Mooring Systems

Simplified Strength Assessment for Preliminary Structural Design of Floating Offshore Wind Turbine Semi-Submersible Platform

The Numerical Simulation on Dynamic Response of Soft Yoke Mooring System Due to FPSO Motions

Dynamic Analysis of Rectangle-FPSO Mooring System

Analysis of a Hybrid Mooring System Concept for a Semi-Submersible Wind Turbine in Intermediate Water Depth Under Operational, Extreme, and Yaw Error Conditions

Numerical Investigation On Interaction Between A Semi Submersible Platform And Its Mooring System

Research on Motion Response of Soft Yoke Mooring Fpso System

Numerical Simulation Analysis on Hydrodynamic Performance of Platform with String-Type Mooring System