Abstract:The Bigfoot direct vertical access (DVA) semisubmersible is a novel floating drilling and production host that provides an attractive alternative to the spar. This concept utilizes heave plates (big feet) that improve the motion characteristics of a semisubmersible in all mild environments (Southeast Asia, West Africa, and Brazil). Bigfoot offers riser-friendly motions that enable top-tensioned risers, which is often a project requirement. This floater works in all water depths, in particular ultra-deepwater (5000+ft) where a tension leg platform (TLP) is not an option, supports top-tensioned risers, and enables drilling and workover operations. The Bigfoot has several advantages over a spar. These include: (1) quayside topsides integration. This eliminates offshore topsides integration, a significant issue for all spar projects in terms of cost, safety, and schedule, (2) a more open deck layout compared to a spar, and (3) no fabrication location restrictions as it can be built by many yards worldwide potentially offering local content to a project. Model tests were undertaken at the Shanghai Jiao Tong University (SJTU) Offshore Basin to assess the dynamic response of the Bigfoot in waves, swell, wind, and current. Five mild non-Gulf of Mexico (GOM) environments were considered. In all the cases, the floater motions are an order of magnitude smaller than those of a conventional semisubmersible for similar deck payload, thus enabling drilling operations and top-tensioned production risers. In a parallel effort, a COSMOS numerical model of the Bigfoot was developed for coupled motion analysis. The experimental results and the COSMOS numerical predictions are in close agreement. In addition to measuring global motions, two heave plates were instrumented with load cells to measure forces and moments. The force measurements from the model tests are in good agreement with numerical predictions using computational fluid dynamics (CFD).

Jacket Effects on Heave, Roll and Pitch Motions of a New Floating Deep-draft Semisubmersible Concept

Numerical Simulation on Dynamic Behaviour of Deepwater J-lay Systems

A Hydrodynamical Study on Motions and Mooring Loads of the Small Scale LNG Carrier

Experimental Investigation on Motion Responses and Sectional Wave Loads of a Moored Semi-submersible in Deepwater

Conceptual Design of A Deep Draft Semi-Submersible Platform with A Moveable Heave-Plate

Comparative Study on A Jacket Launching Operation in South China Sea

Study on Global Performances and Mooring-Induced Damping of A Semi-Submersible

Study on Numerical Simulation of Jacket Launching Progress

Research on Motion and Hydrodynamic Characteristics of a Deepwater Semi-Submersible by Numerical Simulation and Model Test

A Study on the Heave Performance and Loads of the Critical Connections of a Novel Dry Tree Semisubmersible Concept Using Numerical and Experimental Methods

Low-frequency response of vertical motions of a semi-submersible

Motion Response of a Moored Semi-Submersible-Type Single Module of a VLFS in Multi-Slope Shallow Water

Hydrodynamics of A 2d Vessel Including Internal Sloshing Flows

Research on the Coupling Effects Between Ship Motions and Sloshing

Analysis on Low Frequency Heave, Roll and Pitch Motions of A Deepwater Semisubmersible

Experimental and Numerical Study of the Effects of Heave Plate on the Motion of A New Deep Draft Multi-Spar Platform

Effect of the angle of wave and current on hydrodynamic loads of jacket platforms in shallow water

The Performance Assessment of a Semisubmersible Platform Subjected to Wind and Waves by a CFD/6-DOF Approach

Numerical and Experimental Study on Hydrodynamic Performance of A Novel Semi-Submersible Concept

The Experimental and Numerical Analysis for a Deep-water Semi-submersible Platform

"Bigfoot" Direct Vertical Access Semisubmersible Model Tests and Comparison with Numerical Predictions