Abstract:Common terminal voltage measurement can be hardly applied to detect quenches in long high temperature superconducting (HTS) conductor on round core (CORC) cable because not only the HTS normal zone propagation velocity (NZPV) is low but also immobilizing a large number of voltage leads is inconvenient. Distributed optical fiber sensing (DOFS) technology is a promising method for quench detection of long superconductors. To sense the thermal changes of CORC cables during quenches more directly and prevent optical fibers from damages by external stress, a fiber-superconducting composite (FSC) CORC cable was fabricated. For this cable, three optical fibers were placed in three grooves of the copper core respectively, then three HTS tapes were spirally wound on the copper core in sequence. Comparing to a traditional CORC cable, obviously, the FSC CORC cable structure has been changed. To promote FSC CORC cable engineering applications, it is necessary to study the fundamental performance of the cable. In this paper, we investigated the electromagnetic, thermal and mechanical properties of the FSC CORC cable by comparing those with a common one. The results demonstrated that, compared to the common one, the magnetic distribution of the FSC CORC cable hardly changed, but the current distribution of the copper core in the FSC CORC cable slightly changed which led to decreases of transport AC loss, in addition, the thermal characteristics of the FSC CORC cable was slightly changed and the bending tolerance ability of the cables reduced within a bending diameter range of 15 cm. What's more, the embedded optical fibers combined with a distributed optical fiber sensing (DOFS) system are successfully used to detect the temperature changes of the cable surface. Finally, to study the quench behaviors of the cable, we built a quench detection platform, which equips with a voltage acquisition system, a thermocouple temperature acquisition system and the DOFS system. By using the platform to detect the quenches of the FSC CORC cable, minimum quench energy (MQE) of the cable and NZPV of the tape and cable at different currents was tested.

Comment on the technology and application of fiber optic current transformer (FOCT)

Interferometric Fiber-Optic Current Sensor

Research and Application of Generator Protection Based on Fiber Optical Current Transformer

Research on feedback type all fiber current transformer status monitoring

Measurement of Electrical Current with Optic Fiber Technology

Research on Digital Optical Fiber Current Transformer with CT Power Supply

A Fault Diagnosis System of All-Fiber Optical Current Transformer with Correlation Detection

APPLICATION AND PROSPECT OF FIBER OPTIC SENSING TECHNOLOGY IN TUNNEL ENGINEERING

Recent development of optical electric current transformer and its obstacles

An impact-insensitive fiber optic current transformer based on polarization maintaining photonic crystal fiber delay coil

The Study of VFTO Distribution in the Insulation System of IOCT Used in Traction Network

Study on VFTO in UHV GIS substation

Temperature Compensation in Full Optical Fiber Current Transformer Using Signal Processing

Fundamental study on performances of fiber-superconducting composite CORC cable: Electromagnetic, thermal, mechanical and quench behaviors

Error characteristic analysis of fiber optic current transformer with sine modulation

Practical Scheme of Optical Voltage Transformer in High Voltage Substations

Temperature Online Monitoring of Submarine Cable Based on BOTDA and FOCT

Development and Experimental Research of VFTO Measuring Sensor

Methods of Fault Diagnosis in Fiber Optic Current Transducer Based on Allan Variance

Research and Experiments on an External Miniaturized VFTO Measurement System

Optical fiber-based power and data delivery system for high voltage electronic current transformer