Oxidative desulfurization of fuels using alcohol-based DESs
DOI: https://doi.org/10.1007/s11356-024-33093-4
IF: 5.8
2024-04-09
Environmental Science and Pollution Research
Abstract:The presence of sulfur-containing compounds in fuel oil has become a major global issue due to their release of toxic sulfur dioxide. Hydrodesulfurization is a commonly used method for removing sulfur from fuel. However, new desulfurization techniques have been developed recently as hydrodesulfurization (HDS) is ineffective in removing refractory sulfur, e.g., BT, DBT, 4-MDBT. In this study, a series of deep eutectic solvent (DES) using ChCl, salicylic acid, oxalic acid, citric acid, and adipic acid as hydrogen bond acceptors and MeOH, EtOH, BuOH, EG, DEG, and TEG as hydrogen bond donors on different mole ratios were synthesized and then investigated the efficiency of these DESs in extracting sulfur from model and diesel fuel. Densities, viscosity, refractive index, and FTIR spectra of synthesized DESs were recorded. It also included oxidative desulfurization, which is a promising approach offering high selectivity, mild reaction conditions, low cost, and high efficiency. Hydrogen peroxide was selected as the oxidant in this study due to its excellent performance, commercial availability, and high proportion of active oxygen. [Citric acid: TEG] [1:7] and [adipic acid: TEG] [1:8] were found to be the most effective, removing up to 44.07% and 42.53% sulfur from model oil during single-stage extraction at 30 °C using a solvent-to-feed ratio of 1.0 and was increased to 86.87% and 85.06% using successive extraction up to the fourth stage. On oxidation, extraction efficiencies were reported to be 98.98%, 87.79%, and 56.25% and 96.96%, 81.22%, and 44.51% for model oil containing DBT and diesel 1 and diesel 2 with DES [citric acid: TEG] [1:7] and [adipic acid: TEG] [1:8] respectively at 30 °C using a solvent-to-feed ratio of 1.0. The study found that [citric acid: TEG] [1:7] exhibits better extraction performance in the deep desulfurization of fuels at an extraction temperature of 30 °C.
environmental sciences