Abstract:An in-depth understanding of the effects of polymer additives upon the rate, composition, and structure of paraffin deposition is required in the development of deep, off-shore oil fields to predict treatment strategies. To this end, we have developed a new laboratory-scale deposition cell that enables the measurement of wax deposition under controlled shear stresses and thermal gradients. A model oil with 3 wt % of a multicomponent wax was tested in a parallel-plate laboratory-scale deposition cell under laminar flow at low and high wall shear stress conditions (5-7 and 60-90 Pa, respectively). The addition of 0.1 wt % of poly(ethylene butene) (PEB), which has been shown to reduce the yield stress of the gelled solution 10-fold, actually increased the initial deposition rate. However, the deposit eroded from the surface under low shear stress conditions, while the deposit remained intact under high shear stress conditions. The addition of poly(maleic anhydride octadecene) modified with octadecyl amine and poly(maleic anhydride ethyl vinyl ether) modified with docosanyl amine each prevented deposition under similar conditions. Results provide a consistent framework for understanding the role of polymer additives on deposition in terms of the temperature field above the deposition surface and the cloud point of the solution. Polymers that suppress wax nucleation and suppress the cloud point will prevent deposition if the surface temperature is above the cloud point. This is the case with poly(maleic anhydride octadecene) modified with octadecyl amine polymers. Polymers that prevent wax crystal aggregation by a colloidal stabilization mechanism but that do not suppress nucleation do not prevent deposition. PEB polymers fall in this class. However, these polymers can produce deposited layers with sufficiently low mechanical strength that layer thickness can be controlled by erosion. The mechanism of erosion is demonstrated for the maleic anhydride copolymer. Results from gas chromatography and optical microscopy examine the composition and structure of the deposits.

Experimental Study on Wax Deposition in Model Loop

Experimental Investigation Of Wax Deposition At Different Deposit Locations Through A Detachable Flow Loop Apparatus

Effect of operating conditions on wax deposition in a laboratory flow loop characterized with DSC technique

Study on Wax Deposition Process of Crude Oil System under Shear Flow Field Conditions

Study of Wax Deposition Pattern of High Wax-Bearing Crude Oil Based on Cold Finger Experiment

Experimental Study on the Effect of Wax Crystal-Water Droplet Aggregations on Wax Deposition of Water-in-Oil Emulsions

Effect of Wax Composition and Shear Force on Wax Aggregation Behavior in Crude Oil: A Molecular Dynamics Simulation Study

Molecular dynamics simulation of wax deposition in crude oil systems

Experimental study on wax deposition of highly paraffinic oil in intermittent gas-oil flow in pipelines

Molecular dynamics simulation of deposition of high waxy crude oil on different pipeline walls

Wax deposition modeling in oil-water stratified pipe flow

Effect of a Coated Wall on Wax–Asphaltene Molecule Diffusion, Aggregation, and Adhesion Mechanism: A Molecular Dynamics Simulation Study

Investigation on the mechanism of wax deposition inhibition induced by asphaltenes and wax inhibitors

The Development of a Wax Layer on the Interior Wall of a Circular Pipe Transporting Heated Oil -- The Effects of Temperature Dependent Wax Conductivity

Determination of Wax Deposition Rate Model of Blended Oils with Different Blending Ratios

Prediction for wax deposition in oil pipelines validated by field pigging

Novel laboratory cell for fundamental studies of the effect of polymer additives on wax deposition from model crude oils

Establishment and Application of Heat Flow Coupling Model

Numerical Study for Removing Wax Deposition by Thermal Washing for the Waxy Crude Oil Gathering Pipeline.

Investigation of wax deposition and effective diffusion coefficient in water-in-oil emulsion system

Molecular Dynamics Simulation of Waxy Crude Oil Multiphase System Depositing and Sticking on Pipeline Inner Walls and the Micro Influence Mechanism of Surface Physical–Chemical Characteristics