Abstract:The numerical calculation model of time-varying mesh stiffness, static transmission error and composite mesh error of modified helical gears is developed based on loaded tooth contact analysis (LTCA) model. To minimize the fluctuation of vibration excitation force, the optimal modification parameters of three modification methods under designed applied torque and ideal tooth contact condition are determined, and the effects of three modification methods on time-varying mesh stiffness, static transmission error and composite mesh error are analyzed. In order to analyze the sensitivity of the three modification methods to applied torque and gear misalignment, the effects of applied torque in wide range and gear misalignment on vibration excitation force and dynamic transmission error are investigated. The results show that the difference of time-varying mesh stiffness, static transmission error, composite mesh error of helical gears with different modifications methods are obvious. However, the fluctuation of vibration excitation force of helical gears is reduced significantly. When the applied torque is higher than the designed applied torque, the three modification methods show a great reduction of system vibration. When the applied torque is too low, the vibration of modified helical gears is larger than unmodified ones. Meanwhile, the resonance speed of the helical gears is slightly lower. With the increase of gear misalignment, the resonance speed becomes lower correspondingly and the effect of the three modification methods on the reduction of vibration excitation force is not obvious any more. The results can provide effective reference for establishing robust optimization method for tooth surface modification.

Tooth Contact Analysis of HGT Hypoid Gear Drives

Quasi-static Tooth Contact Analysis of Hypoid Gear Drive with Coaxiality Deviations

Contact Analysis of Real Tooth Surface of Hypoid Gear with Cycloid Tooth

Machine-tool settings design for HGT hypoid gear drives

Effects of machine-tool parameters on geometry and contact pattern for face hobbed hypoid gears

Computerized Investigation of Real Tooth Contact Analysis of Face-milled Spiral Bevel Gears

An Improved Algorithm for Tooth Contact Analysis for Hypoid Gear Based on Axial Section Programming

Computerized Design and Analysis of Face-Milled, Uniform Tooth Height Spiral Bevel Gear Drives

Contact Analysis for Spiral Bevel Gear Based on Machine Parameters

Geometric design and analysis of face-gear drive with involute helical pinion

Semi-analytical Loaded Tooth Contact Analysis Method for Spiral Bevel Gears

STUDY ON THE FUNCTION-ORIENTED DESIGN OF POINT-CONTACT TOOTH SURFACES

Study on Building Digital-Twin of Face-Milled Hypoid Gear From Measured Tooth Surface Topographical Data

Tooth contact analysis of elliptical bevel gear with different misalignment

Roughness tooth surface loaded contact pressure forecasting model for face-hobbed hypoid gears

Mathematic model and tooth contact analysis of a new spiral non-circular bevel gear

Analysis of tooth contact for cylindrical gear with high-order topological modification and misalignment

Computer Aided Tooth Contact Analysis in Cylindrical Worm Gears

Preliminary design tool - LLTCA for spiral bevel and hypoid gears

Meshing equation, tooth contact analysis, stress analysis and manufacture of a point-contact gear formed by double-arc milling cutter

Sensitivity Analysis of Helical Gears with Tooth Surface Modification to Applied Torque and Gear Misalignment