A new-type cavitation generator and its application on surplus sludge cells disintegration

Rui LI,Yong-gang HUANG,Dong FU,Xiao-min HU
DOI: https://doi.org/10.13637/j.issn.1009-6094.2018.01.052
2018-01-01
Abstract:The paper is to propose its development of a new-style cavitation generator for regulating the ventilation and the pore plate rotating function so as to disintegrate the excessive sludge cells and get rid of blockage with the economy of energy consumption.As a matter of fact,the "gas nucleus" generated in a diameter area of 2-5 μm can help to successfully increase the cavitation inception numbers,and reduce the energy cost.The rotary pore plate may also generate the axial thrust which is in a position to get rid of the plugging matters so as to overcome the pole blockage effectively.The above mentioned new-style cavitation generator can be used to crack the biologic cells in the surplus sludge in a laboratory,and the soluble chemical oxygen demand (SCOD)out of the biologic cells is measured to evaluate disintegration effects.The cavitation system (CS) has been also designed and used to treat the surplus sludge in a continuous way,with the operation conditions adjusted in accordance with the research demands.According to the results of the orthogonal experiments,the optimal operation condition should be taken when the ventilation ratio is kept at a percentage of 1.4% with the cavitation number being 1.8,then SCOD dissolution velocity is kept at about 0.06%/s.For,over the rate of 95%,it would be possible for the sludge biological cells to get cracked as a result of 30 min treatment.Nevertheless,if the treating time is exactly up to 30 min,about 1 000 MJ energy would be cost to treat 1 m3 surplus sludge.The energy consumption of the said system has thus to be fixed at a rate of 40% or so,that is,less than the ultrasonic cavitation.Besides,with the new-style cavitation generator,the given system can have other advantages,such as,simple in structure,and free from the secondary pollution.Thus,the system can be expected to provide a more effective and economical method for the surplus sludge bio-cells disintegration.
What problem does this paper attempt to address?